- 18:27, 18 September 2024 OnTakt: User settings (hist | edit) [6,415 bytes] Andy (talk | contribs) (Created page with "== Preferences == ===Default page=== ''Requires OnTakt Frontend version 1.6.0+'' By default, OnTakt will open the Machines page after logging in, but this can be changed per user account from the user menu at the top right -> User settings -> Preferences -> Default page. === Presentation mode === ''Requires OnTakt Frontend version 2.3.15+'' Not to be confused with Screenshare mode, presentation mode suppresses automatic popups that might...") Tag: Visual edit
- 16:17, 21 August 2024 WolframOS Backup and Restore (hist | edit) [2,164 bytes] Andy (talk | contribs) (Created page with " ==Backing up applications== #Format a flash drive with a GPT (GUID) partition table and a FAT32 partition. These instructions vary by operating system, so see Formatting USB flash drives for more detailed help. #Connect the flash drive to the OnTakt server PC. #Open the Settings page and scroll down to the "Backups" section. #Select the FAT32 partition you want to store the backup files on from the device dropdown. If your device is not listed, click the refresh but...") Tag: Visual edit
- 13:06, 31 July 2024 OnTakt: Tool replacement notification rules (hist | edit) [2,246 bytes] Andy (talk | contribs) (Created page with "== Custom rules == ''This feature is available in OnTakt server version 4.12.25 and newer.'' == Sequential breakage detection == ''This feature is available in OnTakt server versions between 4.12.19 and 4.12.25.'' Category:OnTakt User Guide {{DEFAULTSORT:Tool_replacement_notification_rules}}") Tag: Visual edit
- 12:29, 31 July 2024 OnTakt: Tool life history (hist | edit) [459 bytes] Andy (talk | contribs) (Created page with "When changing the life of a tool, a prompt to enter notes appears. Category:OnTakt User Guide {{DEFAULTSORT:Tool_life_history}}") Tag: Visual edit
- 12:15, 31 July 2024 OnTakt: Tool location history (hist | edit) [928 bytes] Andy (talk | contribs) (Created page with "Each time a tool's location changes, OnTakt creates a record that includes the new location information. OnTakt considers a tool to have changed location when any of the following occur: * Tool moves into an assembly (or between assemblies) * Tool assembly's location number changes * Tool assembly moves into a process (or between processes) == Reporting == The tool location history report shows the list of tools that have been used at a specific location number on a s...") Tag: Visual edit
- 11:26, 18 July 2024 MTConnect (DMG MORI) (hist | edit) [2,172 bytes] Andy (talk | contribs) (Created page with "thumb|The MTConnect address for each machine is displayed in the Coordinator. Prefix this address with <code>http://</code>and make sure the IP address points to the PC running the Coordinator before pasting it into OnTakt. <onlyinclude> DMG MORI controls with MTConnect enabled can be added to OnTakt by installing the DMG MORI MTConnect Coordinator on a Windows PC in the shop. When configuring a machine in OnTakt, enter the MT...") Tag: Visual edit: Switched
- 11:09, 15 July 2024 OnTakt: Screenshare mode (hist | edit) [116 bytes] Andy (talk | contribs) (Created page with "Screenshare mode (also known as ''demo mode'') displays fake program and process names from a preset list in place of the real names. ''Requires OnTakt Frontend version 2.3.23+'' To toggle it, hold the <code>alt</code> key and press <code>d</code>. When active, the user icon at the top right is replaced with a screen cast icon: none|thumb") Tag: Visual edit
