Unless noted otherwise, version numbers on this page refer to the OnTakt Proxy. See the OnTakt Changelog for release dates.
Currently available
This table is also displayed on the OnTakt Machine Setup page.
| Control Model | Communication Protocol | Cycle state | Part count | Program name | Emergency stop | Variables | Alarms | Active tool (2.7.11+) | Feed rate override (2.4.1+) | Rapid override (2.8.8+) | Cutting time (2.8.21+) | Minimum proxy version |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Brother | OPC-UA | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | 2.8.18 | ||
| DMG MORI | MTConnect | ✔ | ✔ | ✔ | ✓ | ✓ | ✔ | ✔ | 2.8.10 | |||
| FANUC i-Series | FOCAS2 | ✔ | ✔ | ✔ | ✔ | ✔1 | ✔ | ✔ | ✔ | ✔ | ✓ | 2.0.0 |
| Haas NGC | Ethernet Q Commands | ✓ | ✓ | ✓ | ✓1 | ✓ | 2.0.1 | |||||
| MTConnect | ✓ | ✓ | ✓ | ✓ | ✓2 | ✓2 | ✓3 | ✓ | ✓ | 2.8.3 | ||
| Keyence MD-X | WebMonitor | ✓ | ✓ | ✓ | 2.0.1 | |||||||
| Mazak MAZATROL | MTConnect | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓4 | ✓ | ✓ | ✓ | 2.6.4 |
| Caron MiConnect | REST API | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | 2.8.12 | |||
| OctoPrint | REST API | ✓ | ✓ | ✓ | 2.5.0 | |||||||
| Okuma OSP | MTConnect | ✓ | ✓ | ✓ | ✓ | ✔ | ✓ | ✔ | ✓ | ✓ | 1.0.0 | |
| Siemens SINUMERIK 840D sl | OPC-UA | ✓ | ✓ | ✓ | ✓ | ✓1 | ✓ | ✓ | ✓ | ✓ | 2.7.6 | |
| Sodick EDM | MTConnect | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | 2.8.11 | |||
| TRUMPF TruLaser | OPC-UA | ✓ | ✓ | ✓ | ✓ | ✓ | 2.7.8 | |||||
| XMC5 | TCP | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | 2.7.3 |
✓ indicates single-path support
✔ indicates multi-path support (requires proxy version 2.8.0 or newer)
1 Only variables used in OnTakt are read from the control, including but not limited to:
- Program load variable
- Machine part count variable
- Process part count variable
- Process display variable
- Process mapped variables
2 Requires the control to have software version 100.20.000.1200 or newer.[source]
3 Requires some additional configuration.
4 MAZATROL controls must have MTConnect schema version 1.4 or newer to report the active tool.
5 Features available on machines connected via XMC may vary by machine type, software versions, and configuration.
Coming soon
| Model | Protocol | Cycle state | Part count | Program name | Emergency stop | Variables | Alarms | Active tool | Feed rate override | Rapid override | Cutting time |
|---|---|---|---|---|---|---|---|---|---|---|---|
| DMG MORI | OPC-UA | ✔ | ✓ | ✔ | ✓ | ✓ | ✔ | ✔ | ✔ | ||
| Makino Hyper-i | OPC-UA | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | |||
| HEIDENHAIN HeROS | OPC-UA | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | |||
| LSV2 | ✓ | ✓ |