OnTakt Changelog (staging)

Server 4.12.13, Client 2.3.13, Proxy 2.8.3

5/13/2024

New features

• Maintenance history: see a timeline of issues and maintenance records from the Equipment page.
• Issues now have an "additional value" field that is added to the automatically-calculated downtime value.
• Shift notes notifications now include a list of tools that were replaced and tools that will need to be replaced soon.
• The to-do list now includes maintenance items from machines and equipment instead of only showing shop-wide items.
• Maintenance reminders are no longer shown as alerts. This upgrade does not automatically delete existing maintenance alerts.
• Added a "Duplicate" action to the issue menu.
• Added a "Pump" inventory item type.

Bugs fixed

• Fixed server error when deleting an inventory item that is used for maintenance. The maintenance item will now have the inventory item requirement removed.
• Fixed server error when deleting a custom shift notes field that had values already entered. The values will now be deleted as well.
• Pressing the browser's back button after selecting a report to run will now return to the reports list instead of navigating away.
• Updated the "send feedback" URL to work with the new Jira portal instead of navigating to an error page.
• The internal list of read alert IDs stored in the browser will now be limited to only contain alerts that still exist.

Proxy changes

• When using a custom OPC-UA node ID, the following data items can now accept any numeric OPC-UA data type:
  • Part count
  • Emergency stop
  • Alarm count
  • Feed rate override
  • Active tool number
• The proxy watchdog timer can now be changed from the default of 1 minute by setting [interval]watchdog to a number of seconds in the configuration file.

Server 4.12.12, Client 2.3.12, Proxy 2.8.2

5/06/2024

New features

• The states page now supports a "rolling window" time interval mode.
• Issues can now have a solution cost, which allows OnTakt to calculate how quickly fixing the issue will pay for itself.
• Issue menus now have an "end issue" button.
• The machines page now allows hiding offline machines.
• The "broken" tool replacement reason has been renamed to "damaged".
• Machines can now be disabled, which will hide them from the UI and stop the proxy from attempting to connect to them.
• The daily scheduled auto-refresh now occurs without prompting if there are no dialog windows open.

Settings

• OEE is now disabled by default, but can be enabled in the global machine settings window.
• The "max idle time" and "max feed hold time" options can now be set to 0 to disable color fading entirely.
• Added a global language setting for use in automated notifications and scheduled reports. The web interface language will still follow the browser's settings.
• Added a global currency setting that shows consistent currency symbols in the web interface for all users as well as reports.
• Email addresses stored in notification channels can now be viewed after saving.

Bugs fixed

• The selected timezone option is now validated before use.
• The demo machines provided by the proxy now accept shiftStart and shiftEnd times via query parameters again.
• The URL field of the notification channel editor no longer shows "Unchanged" when creating a new channel.
• The utilization button in expanded machine cards now navigates to the state history page again.

API changes

• The /api/options/calculator endpoints have been removed. Use GET /api/options and POST /api/options/savings_calculator instead.

Server 4.12.11, Client 2.3.11, Proxy 2.8.1

4/30/2024

New features

• Added support for multi-path machines.
  • Create a separate machine for each path and set the path number each one should use.
  • Supported on Okuma and DMG MORI machines using MTConnect and any machines using FANUC FOCAS.
• The States page now hides archived machines unless the "Show machine archive" option is checked. This option syncs with the same option in the machines page filters.
• The States page now has an option to show only favorite machines. This option syncs with the same option in the machines page filters.
• The average utilization of all machines is now always shown at the top of the states page, not just when a tag is selected.
• Added a "TMAC limit suggestions" report. This is still experimental and values should be double-checked manually before use.
• The "Open in Inspection" button in the part editor will no longer show up if Inspection is not installed. Requires OnTakt Daemon version 1.0.9 or newer.
• The "Event Viewer" button is now labeled "Data Viewer" in the alarm detail window for consistency with TMAC.
• The Windows version of the proxy now supports FANUC FOCAS machines.

Bugs fixed

• Reports with date intervals are now more consistent about handling date boundaries with respect to time zones.
• Dismissing all alerts will now send deletion messages in batches of 100 to reduce network traffic and improve client performance.
• Fixed state history card progress bars showing 100% utilization in dense view mode.
• The proxy will now leave machine update fields blank if it could not read data from the machine, which should reduce the chances of ghost parts and duplicate alarms.

---

Client 2.3.10

4/23/2024

• Fixed machine cards not being draggable in the default sort mode.
• Fixed the machine menu buttons in expanded machine cards overflowing into the machine status details section on certain screen widths.

Server 4.12.10, Client 2.3.9

4/22/2024

New features

• The following reports now support breaking down data by shift or fixed time interval:
  • Billable Excess Capacity Report
  • Margin Report
  • Parts Report
  • State History Report
  • Utilization History Report
• Redesigned the Reports page to be easier to use.
  • Scheduled reports are now on their own page in the Reports dropdown at the top.
• Added a button to zero the on-order quantities of multiple selected inventory items.

Bugs fixed

• Issue total downtime and value are now recalculated when updating from the server instead of appearing blank.

Server 4.12.9, Client 2.3.8

4/18/2024

New features

• Issues
  • The issues table and issue edit dialog now show the name of the user who reported the issue.
  • Issues can now be assigned a priority (low, medium, or high).
  • Issues can now be tagged and filtered by tags.
  • The columns of the issues table can now be customized per-user.
  • There is now a button in the issue actions menu to view a list of downtime blocks linked to an issue.
• The machines table view now has a tags column that can be enabled.
• The machine states page can now be filtered by tag(s). When filtering by tag, the average utilization across all matching machines will be shown at the top of the page.
• The machine states page can now be sorted by the default order, machine name, or utilization.
• There is now a button to manage machine state definitions in the edit menu on the machines page.
• When testing a notification channel, the test button will show a loading indicator.

Bugs fixed

• Fixed the x-axis of states charts not correctly adjusting to dense mode and showing overlapping time labels.
• When an SMTP connection times out, the server now logs an error message instead of just returning HTTP 500.
• Fixed a server error when sending tool stock reports.

Server 4.12.8, Client 2.3.7

4/15/2024

New features

• These reports now show data broken down by shift:
  • Machine Runtime Report
  • Parts Report
  • State History Report
  • Utilization History Report
• The machines page can now be set to show part counts for all shifts or only the current shift from the Sort & Filter menu.
• Each tool now keeps track of the last part it produced. This can be displayed in the tools table by enabling the "Last part" column.
• To reduce screen clutter:
  • The States tab is now nested under the Machines tab and the Assemblies tab is now under Tools.
  • User management has been returned to the Global Settings window.

Bugs fixed

• Fixed server error when deleting machines.
• Fixed server error after replacing a tool.
• Fixed the maintenance search field in the downtime editor searching from the current time instead of the start and end of the selected day.
• Fixed the issues page showing equipment IDs instead of names.
• Fixed client routing errors resulting in an infinite loading spinner.

Breaking API changes

• Renamed the Event model type to Alarm to prevent confusion with the (unrelated) event bus
  • Moved /api/events/* to /api/alarms/*
  • Renamed Downtime.event_id to Downtime.alarm_id
  • Renamed Machine.event_notification_grouping to Machine.alarm_notification_grouping
  • Renamed the alarms production chart feature to nc_alarms
  • Renamed the events production chart feature to tmac_alarms
  • Renamed the event query parameter of GET /api/downtime to alarm
  • Renamed the event_report report type to alarm_report
• Renamed the MaintenanceIssue model type to Issue
  • Moved /api/maintenance/issues/* to /api/issues/*
  • Renamed Downtime.maintenance_issue_id to Downtime.issue_id
  • Renamed the maintenance_issue query parameter of GET /api/downtime to issue
  • Renamed maintenance_issues to issues in the response body of GET /api/shiftNotes/list and the request body of POST /api/shiftNotes/submit.

Server 4.12.7

4/05/2024

• Fixed cross-machine program error falsely triggering when creating parts manually.

Server 4.12.6, Client 2.3.6

4/04/2024

• Fixed a server error when calculating the average utilization for a chart period where one or more past shifts didn't have enough data to calculate shift utilization.
• Fixed a bug that caused charted TMAC events to do nothing when clicked.

Server 4.12.5, Client 2.3.5

4/04/2024

New features

• Part counts displayed in machine cards are now for only the current shift. If the machine is not inside a shift, the part count is for the entire chart.
• Utilization displayed in expanded machine cards is now only based on the current shift. If the machine is not inside a shift, utilization is calculated for the entire chart.
• Time outside the current shift is now shaded on production charts.
• Goals on production charts are now calculated per-shift.
• Added a marker on production charts indicating the current time.
• Enabled production chart layers are now saved to user accounts.

Bugs fixed

• Fixed the maintenance item table showing equipment IDs instead of names.
• Fixed the equipment dropdown in the maintenance item and issue editors not listing any options.
• Fixed utilization not displaying in expanded machine cards.
• Deselecting a tag from the machine summary panel by clicking the X on it now saves the change to the active user account as if it were removed from the tag selector in the filters dropdown so it doesn't reappear the next time the machines page is loaded.

Server 4.12.4, Client 2.3.4, Proxy 2.7.13

4/03/2024

Tools

• Tags can now be removed from all selected tools.
• The tools page now shows the active filter mode at the top.
• Tool assemblies have been moved to a top-level tab.

Maintenance

• Maintenance items can now specify a warning interval. This will cause it to show up in the upcoming maintenance section of the to-do list that far before the due date.
• Upcoming and due maintenance items are now shown in the equipment page tree view, on machine cards, and on machine production pages.
• Equipment can now be removed from a machine and made global.
• The maintenance items table now shows the machine associated with the item's equipment.
• Added new maintenance-related inventory item types:
  • Batteries
    • Alkaline
    • Button
    • Rechargeable
    • Other
  • Filters
    • Air
    • Liquid
    • Other (items using the "Durable, Filter" type will be converted to this one during the upgrade)
  • Fluids
    • Coolant
    • Grease
    • Oil
    • Other
  • Seals
    • O-Ring
    • Other
• The "corners" field in the inventory item editor will now only appear if an "insert" type is selected.
• Maintenance items can now use inventory items without specifying a quantity. Completing the maintenance item will not subtract from inventory, but it will require the presence of the item.
• Downtime can now be linked to a maintenance issue regardless of the selected downtime category, and downtime categories no longer have a "maintenance-related" checkbox.
• "Maintenance issues" are now called just "Issues" and have their own top-level tab.
• Maintenance items that are assigned to equipment, which is then not assigned to a machine, now show up in the to-do list.

Shift notes

• Mid-shift and end-of-shift messages are now sent per-shift instead of per-day.
• Individual shift notes submissions are now tracked.
• Shift notes are now submitted per-shift instead of per-day.
• Missing shift notes submissions for the current day are now shown in the to-do list.
• Fixed error rendering action menus for machines outside of a shift.

Other changes

• The lists in expanded inventory item table rows are now displayed as tables.
• Hovering over relative alert timestamps will now show the absolute timestamp in a tooltip.
• Significantly improved render performance of to-do list and alert panes.
• Operator view layout improvements.

Bugs fixed

• Fixed message links and actions not showing up in Microsoft Teams.
• When logging in, the server will only redirect to the original request URL if it was a report generation link.
• If there are multiple machine state definitions that match a machine's state string, an alert will now be shown instead of just logging an error.
• Fixed OEE indicators not rendering correctly.
• Fixed the state definition merge dialog not showing the state definition name.

Proxy changes

• Machines can now be configured to be ignored by the default proxy and handled by additional proxy instances instead.
• The proxy will now negotiate the security mode with OPC-UA servers even when using anonymous login.
• The proxy now supports authentication via user API key.
• The proxy will now log "Ignoring machine [ID] because it is not enabled in the config file" only once per machine.
• Fixed error message formatting in proxy log when TMAC job lookup fails while fetching tool work history.

API changes

• The read-only shift_notes_submitted field of Machine objects has been renamed to last_shift_notes_submission, and it is now an object instead of a timestamp.
• To-do items now use the same action callback format as alerts.
• The to-do list can now be refreshed on-demand by specifying the refresh query parameter to GET /api/todo.
• Applying multiple mutually-exclusive filters to GET /api/tools will now result in a 400 error instead of the server silently picking one.
• The experimental percent_life and percent_warn fields of Tool objects are now omitted from API responses.
• The maintenance_related property of DowntimeCategory objects has been removed.
• POST /api/tools/bulkAddTags has been renamed to POST /api/tools/bulkChangeTags, and its tags request property has been renamed to add. The new remove request property will remove tags.

Server 4.12.3, Client 2.3.3

3/20/2024

• Fixed inventory point item quantities not saving.
• Inventory points are now published to the event bus when their item quantities change.

Server 4.12.2, Client 2.3.2

3/20/2024

• Fixed tool replacement wizard failing to initialize.
• Fixed server error when replacing tools.
• Fixed server error when deleting inventory items.
• The maintenance item editor now indicates errors with the information step in the wizard navigation header.
• New CNC machine icon.
• New kudos emoji options: 🥳🤪🐦🐧🐸🐙🐝🦋🩵👆🤜🤛👀🌞⭐💡

Server 4.12.1, Client 2.3.1

3/19/2024

New features

• Maintenance items can now have an initial entry date that will be used as the start of the first reminder interval. This is useful when creating maintenance items in the middle of their interval. Once an entry is created for an item, the last entry date is automatically used instead.
• The maintenance item editor is now a wizard-style interface to make sure all tabs are seen before saving.
• Added a "view log" action to the maintenance item menu with the same behavior as clicking the row in the table.

Bugs fixed

• Fixed the equipment tree view only showing one piece of top-level equipment.
• Fixed the name field of the equipment editor aggressively removing spaces while typing.

API changes

• Inventory endpoints have been moved out of the tools endpoint:
  • Moved /api/tools/inventory/* to /api/inventory/*
  • Moved /api/tools/ordering/* to /api/inventory/ordering/*
• The items in each inventory point are now stored more efficiently and resiliently.
  • Renamed InventoryPoint.tools to InventoryPoint.items

Server 4.12.0, Client 2.3.0

3/18/2024

New features

• The state history report now includes the average utilization of each machine.
• Recurring alerts will no longer be moved back to the top of the list. Instead, a "times seen" counter will increment and they will remain wherever they were in the list when they first appeared.
• The filter and sort options for the machines page are now saved to individual user accounts instead of the browser. Note that this does not include the drag-and-drop machine sort order, which is still shared across all accounts.
• The machines page can now be sorted by the value of each machine's display variable.
• Machines in operator view can now be sorted by a named variable.
• Machine description previews are now displayed in expanded machine cards. Clicking the preview will show the full text in a window.
• The states page now has a dense view option that can show up to six times more machines on the screen at once.
• Notification channel dropdowns now have a button to manage the list of notification channels.
• Added a button to view the audit log of a single user's actions.

Maintenance

• Equipment and subsystems: use the Equipment tab to create equipment (standalone) or subsystems (tied to a machine). Maintenance items and issues can then be assigned to equipment separately from machines.
• Archiving machines: machines that will not be used for a while should be archived to declutter the machines list and enable the correct set of maintenance items, which can now be set as needed for non-archived and/or archived machines.
• Downtime categories now have additional metadata that can be used to simplify the downtime entry process:
  • Maintenance-related downtime categories will offer dropdowns to link to a maintenance item and/or issue.
  • Planned or unplanned maintenance categories will hide the planned checkbox.
• Maintenance items can now store a list of inventory items they consume.
• Maintenance issues can now refer to the item that was neglected to cause the issue.
• Overdue shop-wide maintenance items are now shown in the to-do list.
• Maintenance entries now store the unit entered at the time of creation in case the unit in the maintenance item changes later.
• Added a button to download charted maintenance measurements as a CSV file.
• Added a checkbox to show only overdue maintenance items.
• Improved interface for linking to maintenance issues from the downtime editor.

Bugs fixed

• Alerts for scheduled report errors now include the name of the scheduled report that encountered the error.
• Fixed an error that occurred when creating new maintenance items.
• Fixed an error that occurred when deleting machines.
• New machines will no longer create parts when they first connect, which will prevent them from creating hundreds of ghost parts immediately.
• The error message displayed when creating a machine state definition that uses a state string that is already in use by another state definition now shows useful information.
• Maintenance item name is now required during creation.
• The machine editor now has checkboxes for clearing the "NC authentication" and "TMAC API key" fields.
• Fixed "OnTakt | OnTakt" being displayed as the page title while loading.
• Fixed tool usage progress bars in the part editor always showing 100%.
• Fixed incorrect scroll behavior in the part editor.
• Text in the tools table notes and stickout columns will now wrap correctly.
• Fixed tool replacement hover text not displaying on production charts.
• For notification channels with an unknown service, a generic webhook icon is now shown instead of poorly rendered text.

Other changes

• The global settings dialog has been simplified by moving settings relevant to only one page into the page itself and making the user list into its own page.
• Improved desktop and mobile page layouts of page header buttons.
• The one-time maintenance issue feature has been removed, and existing one-time maintenance issues will be merged into the downtime feature during the upgrade:
  • One-time maintenance issues associated with a single downtime block will have their notes added to the notes of the downtime block.
  • One-time maintenance issues associated with a machine but not with any downtime blocks will be converted to downtime on that machine.
  • One-time maintenance issues associated with multiple downtime blocks are not actually one-time issues and will be kept as maintenance issues.
  • One-time maintenance issues that are not associated with any machines or downtime will be kept as maintenance issues.
• Removed the historical machines page dialog now that the page allows viewing multiple days.
• Wizard-style interfaces now respect reduced motion.

API changes

• Added GET /api/downtime for querying downtime blocks across all machines.
• Removed GET /api/maintenance/issues/names
• Removed the issue_type field from the MaintenanceIssue type because one-time maintenance issues no longer exist. Use the downtime feature instead.
• Removed the inventory_points property from the data returned by GET /api/tools/<id>/replace. A new default_inventory_point_id property has been added instead.

Some API endpoints used POST to create new objects, but that is now deprecated and will be removed in a future update. Use PUT instead for:

• /api/machines
• /api/processes
• /api/tools/assemblies

API endpoints deprecated in a previous release have been removed:

• Removed POST /api/tools/inventory/<ipt_id>/receiveOrder. Use POST /api/tools/ordering/items/<item_id>/receiveOrder instead.
• Removed GET /api/machines/<id>/shiftNotes/<date>. Use GET /api/shiftNotes/list?date=<date>&machine_id=<machine_id> instead.
• Removed POST /api/machines/<id>/shiftNotes/<date>. Use POST /api/shiftNotes/submit?date=<date>&machine_id=<machine_id> instead.

Server 4.11.0, Client 2.2.0, Proxy 2.7.12

2/12/2024

New features

• The current work order of a machine is now displayed on its machine card beside the active program and process information.
• Machines that have not reported in an hour will now show an OFFLINE indicator instead of the last reported status and color.
• Experimental tool run time tracking. See tool usage modes for more information.
• The maintenance item table now shows the next due date of each item.
• The feed rate line on production charts is now rendered as a step chart for more visual accuracy when the feed rate does not change often.
• The part editor now includes a link to the corresponding parts in Inspection. This functionality will offer better features in a future Inspection update.
• Errors encountered when calculating the value of an auto-ending downtime block will now appear as alerts.

Bugs fixed

• OnTakt will now ignore FANUC FOCAS machines reporting an active tool number of 0.
• The OK/Cancel buttons will now always fit in the machine edit window instead of scrolling.
• Fixed auto-ending downtime failing when the associated process does not have a cycle time set.
• Fixed the operator page not loading sometimes.
• Fixed double-clicking a day in the chart time range selection calendar not selecting a single day correctly.

Breaking changes

• The offline tool tracking spreadsheet has been removed.

API changes

• Added GET /api/downtime/<id> for retrieving a single downtime block.
• Removed POST /api/tools/replacements/sheet. This feature is no longer available.

Server 4.10.26, Client 2.1.25, Proxy 2.7.11

1/22/2024

Active tool tracking

• The tool number a machine is currently using is displayed in NC section of expanded machine cards.
• Assigned tool not used alerts: when a machine completes several parts without using a tool location that has an assembly assigned in OnTakt, an alert will be created with an option to remove the tool assembly from the process to avoid falsely counting parts against its life.
• Unassigned tool alerts: when a machine uses a tool that doesn't have an assembly assigned in OnTakt, an alert will be created to make sure all tool life is being counted correctly.

Operator view improvements

• Multiple machines can now be viewed together. To do this, filter the machines page by tag(s), and then click "Operator View" at the top right of the summary card.
• The machine actions menu is now displayed above each machine.
• The current value of the display variable is now shown for each machine.
• The current values of process-mapped variables are now shown for each machine.
• The tools table can now be filtered by maximum number of parts remaining.

Other new features

• To-do items relating to processes and machines now specify the name of the process and/or machine in the item description.
• Offline machines are now listed in a separate to-do section.
• When importing inventory point counts from a CSV file, the "name" column can now also be labelled as item name in the file.
• TRUMPF lasers are now supported via OPC-UA.

Bugs fixed

• The inventory verification window now uses pop-up quantity field editing to avoid re-sorting the table while typing a new quantity when the table is set to sort by the quantity column.
• The downtime report will no longer fail when downtime blocks do not have a value set.
• The proxy will now search a wider range of time for TMAC event monitors when reporting alarms. This means the "open in event viewer" link for events will work for more TMAC alarms.
• Machine alarms without timestamps will no longer cause the client to fail to load the machines page.
• Fixed the tool replacement checklist editor in the global settings window not working.

Note: Machines that were last online when running server version 4.10.0 or older will have their alarm status cleared in OnTakt when this update is installed.

Server 4.10.25, Client 2.1.24

1/16/2024

New features

• To-do list: see machines that need attention (prioritized by earn rate) and upcoming tool replacements in one place.
• When calculating OEE for days with downtime reported, the duration of the downtime will be used as the unavailable time instead of estimating it from part time deltas.
• When emailing scheduled HTML reports, an HTML attachment with the report contents will now be included. When using email clients that do not display inline SVG images (such as the Gmail webmail client), download and open this HTML file in a browser to view the report.
• When clicking help buttons on a computer without an internet connection, a QR code linking to the help page will now be displayed so users can open it on a mobile phone with network access.
• State definitions can now be merged. This will not delete historical state records and instead reassign their state definition.
• Added a popup window for editing the machine state list of a state definition.

Bugs fixed

• Fixed parts per cycle not being considered when calculating goals.
• Fixed margin report overcounting shift durations.
• Fixed server error when deleting a state definition that is currently in use by a machine. The machine's state will now be cleared instead.
• On production charts, upcoming tool replacements are now predicted for all tools in use instead of only tools that have been replaced within the time range shown on the chart.
• Fixed notification channel edits not being published to the event bus, so it is no longer necessary to refresh after editing notification channels.
• More helpful error message when the SMTP hostname is invalid.
• Alerts are now correctly sorted newest-first.
• The client will no longer include tools with blank quantities when submitting an inventory verification, which caused a server error.

Any machines that have not yet been upgraded to the new array-style alarm persistence format will have their alarm state cleared from the database during this upgrade.

Server 4.10.24, Proxy 2.7.10

1/10/2024

• Added a "total" row to the summary table of the Billable Excess Capacity report.
• Consider target utilization when calculating average available utilization in the summary table of the Billable Excess Capacity report.
• Machine states are no longer case-sensitive and wildcards are supported. Learn more
• New installations will now ship with machine state definitions for Siemens OPC-UA and XMC machines, and the TOOL/MDI machine state will be in a new "Setup" state definition.
• The proxy will now restart itself when a single NC update has taken one minute. This should better handle the case where cnc_allclibhndl3 hangs indefinitely.

Server 4.10.23, Client 2.1.23

1/09/2024

New features

• Machines page table view: click the table icon in the toolbar to switch to a tabular machine view with customizable columns.
• Tool replacement images: users can now upload a photo when replacing a tool.
• Billable excess capacity report: machines can now specify a target utilization and earning rate to use for this report.
• Auto-ending downtime will now calculate its value when it ends unless a value has already been specified.
• The tool replacement history table columns can now be customized.
• Added a global option to send a notification when the life of any tool changes.
• Added a button to edit the list of inventory points from the inventory point dropdown in the machine editor.

Bugs fixed

• Fixed the inventory point dropdown menu in the machine editor.
• Fixed inventory items being added to the downtime category list when they are modified on the server instead of modified downtime categories.
• Fixed an error when updating downtime on production charts.
• The server will no longer attempt to send event bus messages to WebSocket clients that have experienced a network error.

Other changes

• The object trash is now accessible from the user menu instead of the global settings window.
• The Favorite and Pin buttons in the tools table have been moved from the Name column to the Actions column for better mobile usability and desktop appearance.
• Machines will no longer be considered "stuck" is they have recently switched states even if they have not produced a part.
• Use system tooltips on repeated elements for better rendering performance of long lists.

API changes

• GET /api/machines/<id>/chart now supports requesting specific response fields via the feature query parameter for better performance.
• GET /api/parts now supports filtering parts by work order via the work_order query parameter.

Server 4.10.22, Client 2.1.21, Proxy 2.7.9

12/13/2023

New features

• There is now an "Add all" button when assigning shifts to machines in the shift editor.
• Dialogs are now better adjusted for auditor users: the OK/Cancel buttons are hidden and a close button is always present.
• Improved production chart rendering performance when there are many parts.

Work orders

• Set the work order of a machine from the machine editor or under the production chart to automatically assign it to new parts. You can also choose whether to keep the work order set after the machine changes to a different process.
• Set the work order of an individual part from the part editor.
• Set the work order of many parts at once by selecting them on the chart and choosing "Set work order" from the right click menu.
• Parts with a new work order will be labelled on production charts.

Custom machine properties

• Custom OPC-UA node IDs.
• Custom MTConnect XPath queries.
• Per-machine option for verbose proxy logging.

Bugs fixed

• Leaving a required numeric field blank will now set it to zero instead of causing a server error.
• Entering order quantities in the inventory item ordering table now uses popup field editing to fix a bug where the displayed value got out of sync with the stored value during a table re-sort.
• State times in the machine runtime report will now be limited to the time range selected.
• Clicking on days in the machine overview window now navigates to the production chart for that day correctly.
• The inventory verification window now adjusts to fit on small screens.
• Licenses applied recently were not setting the machine limit.
• Fixed error during database downgrade when there is pending downtime.

Server 4.10.21, Client 2.1.20, Proxy 2.7.8

11/14/2023

New features

• Tool post-replacement checklists: items must be checked off after replacing a tool. These items can be defined in global settings and overridden for individual tools.
• Added support for reading macro variables from Haas machines without MTConnect using Q-Commands.
• Added a global setting to disable the "production stopped" machine status.
• Machine action buttons are now shown on the production page in addition to expanded machine cards.

Bugs fixed

• Downtime that started on a previous day and has not yet ended is now shown as current downtime on machine cards.
• Fixed incorrect cross-day shift rendering on production charts.
• Fixed incorrect goal rendering on production parts with cross-day shifts.
• Double-clicking a day in the date range selection calendar will select only that day.
• Ignoring zero part counts is now an opt-in setting on each machine instead of automatically affecting all FOCAS machines.
• Proxy will now exit after failing to read a frame from the server.
• Removed useless machine filter from programs table on process pages.

Server 4.10.20, Client 2.1.19

10/25/2023

• Added an inventory point merge button.
• Manually creating parts will default to the current time on the last day of the selected time window rather than the end of the last selected day.
• Fixed server error preventing importing tools from a spreadsheet.
• Fixed "tools using this item" inventory item link not showing all tools due to the "only show tools that are past their warning threshold" filter applying by default.
• Fixed the tool life tab of the part editor not fitting on shorter screens.
• The log message "Skipped field '...' when applying dict to <...> because the current user is not allowed to write to it" will no longer appear for fields that no users are allowed to modify.

Client 2.1.18

10/18/2023

• Fix production charts refreshing every time the machine state updates.

Server 4.10.19, Client 2.1.17

10/18/2023

New features

• Item-oriented tool receiving: click "Receive into inventory points" in an inventory item's menu to distribute the received quantity into inventory points, rather than selecting multiple items to receive into a single inventory point.
• The inventory point manager is now a dialog window, leaving more screen space for the inventory items table.
• The machines page now allows charting an arbitrary number of days (ending with the current day) instead of just the current day or week.
• Production pages now allow charting any range of days instead of just a day or week at a time.
• When choosing dates to chart on the production page, there is now an indicator on days with parts.
• When charting multiple days, there are now vertical separators between days.
• When filtering the tools table by machine, switching to the tool assemblies table will now automatically filter by that machine's current process.

Bugs fixed

• Fixed incorrect goal calculations when charting time spans that include days with and without shifts.
• Fixed tool replacements not showing up correctly in the table under the production chart.
• Ellipsize shift labels instead of overlapping them when there are too many to fit across the width of the production chart.

API changes

• Added an optional month query parameter to /overview endpoints.
• Deprecated POST /api/tools/inventory/<inventory_point_id>/receiveOrder. Use the new POST /api/tools/ordering/items/<item_id>/receiveOrder endpoint instead.

Server 4.10.18, Client 2.1.16

10/09/2023

• Fixed server error when modifying part flags from Inspection.
• If a process to filter is selected on the tools page, it will now carry over when switching to the tool assemblies page.
• The program and process editors are now both linked from the overview tab of the machine editor.
• The interface language will now change immediately when the browser's language changes without requiring a page refresh.
• The license name is now pre-filled in the feedback form linked from the user menu.

Server 4.10.17, Client 2.1.15

10/02/2023

• Added maintenance issue column to downtime table on production page.
• Improved the tool editor's assembly selection dropdown:
  • The location and process name of each assembly are now displayed.
  • The list is searchable by assembly name, process name, or assembly location.
• Fixed two server errors when duplicating a tool assembly.
• Fixed the duplicate tool assembly dialog freezing after clicking OK.
• Added the GET /api/maintenance/issues/:id API endpoint for retrieving a single maintenance issue.

Server 4.10.16, Client 2.1.14

9/28/2023

New features

• Added custom shift notes fields.
  • Set these up in Global settings > Machines > Custom shift notes fields.
  • Values entered for custom fields will be included in shift notes submission notifications.
• Machines page filters are now persisted between page loads.
• Accessing a report generation URL (for example, by clicking "Run report" in a scheduled report notification), will now redirect to the login page instead of showing an authentication error if there is no active login session.

Bugs fixed

• Fixed goals not charting for past days.
• Fixed machine tag listings only including the first letter of each tag.
• Fixed a bug in the input fields for relative time parameters when scheduling a report where negative offsets were not accessible with the number field spin buttons.
• Fixed a bug where the description of a downtime category could not be set empty.
• Fixed a bug where the associated machine column of the shift manager was not wrapping machines onto multiple lines.

Server 4.10.15

9/19/2023

• Fixed a server error when creating a new downtime category.
• Fixed scheduled reports not updating the last run date when running as a background task.
• Use the correct external URL for links in reports (requires OnTakt Daemon 1.0.5)

Server 4.10.14, Client 2.1.13, Proxy 2.7.7

9/18/2023

• Added a per-machine setting to send a notification when the machine finishes a cycle with at least one part.
• Added TMAC tool work limits to tool work report charts.
• Added a button to remove the value for a variable from the part editor.

Server 4.10.13, Client 2.1.12

9/15/2023

Fixed an error loading available part variables from the server.

Server 4.10.12, Client 2.1.11

9/15/2023

New features

• Tools can now have a replacement message that is displayed to the user after replacing the tool.
• Added a global setting to automatically increase the minimum on-hand quantities of inventory items to ensure there is at least one per machine using tools based on that item.

Bugs fixed

• Fixed server error when creating a new user.
• The client will no longer allow submitting maintenance issues without a name.
• Fixed the reports page not loading report parameters from the URL on page load, which prevented the "tool work" shortcut menu item from working correctly.

Server 4.10.11, Client 2.1.10

9/14/2023

New features

• The tool work report can now be run without including tool replacements. If the tool replacements chart is not enabled, the tool work chart is aligned to number of cuts instead of time.
• Processes can now be duplicated.
• The user who replaced a tool is now displayed in the tool replacement history table and in the tool replacement editor.

Bugs fixed

• Auto-ended downtime blocks will now update in the client without requiring a manual refresh.
• Fixed server error when creating a new tool.
• Fixed server error when creating a new maintenance issue.
• The name, notes, and suppliers columns of the inventory item table now wrap when the text is too long.

Server 4.10.10, Client 2.1.9

9/07/2023

• Added total parts and work to the tool work report.
• Fixed TMAC tool and section not showing up in the TMAC alarms table on production pages.
• Clicking the tool assembly name in the TMAC alarms table will now open the tool assembly editor.
• Fixed error sending shift progress notifications.
• Downtime report improvements:
  • Pie chart legends are now tables.
  • Legend entries now include the total value lost.
  • Renamed "Reason" chart to "Planned".
  • Improved layout for printing in portrait mode.

Server 4.10.9

9/06/2023

• Fixed error when creating event objects.
• Fixed error when dismissing all alerts.
• Fixed error when removing an option.

Server 4.10.8

9/05/2023

• Fixed server error when saving inventory items with suppliers.

Server 4.10.7, Client 2.1.8, Proxy 2.7.6

9/04/2023

New features

• Added OPC-UA support for SINUMERIK 840D sl controls.
• Added a tool alarm report.
• Added start and end times to the "downtime blocks with notes" table in the downtime report.
• Downtime with notes in the downtime report now have edit buttons that open the downtime editor for that block in the client.
• Added a tool number column to the tool replacements table on the production page.
• Added confirmations when closing the shift notes entry wizard or switching between days.

Bugs fixed

• Tool and tool assembly images will now refresh automatically when they may have changed.
• Shift-based calculations (such as calculating process goals) now work with the new shift definition format.
• Fixed the production overview being offset by a day depending on the client's time zone.
• Fixed life analysis columns not automatically appearing in the tools table when enabling life analysis mode.
• Fixed the life improvement column of the tools table always being blank when in life analysis mode.
• Fixed error 404 popup when opening the user editor to create a new user.
• Fixed server error caused by modifying a user's default page.

Server 4.10.6, Client 2.1.7, Proxy 2.7.5

8/21/2023

Tools

• Tool assemblies can be marked as shared.
  • When the machine in their assigned process switches to a different process, these tool assemblies will automatically be moved to the newly active process.
  • Shared tool assemblies are shown in the tool assemblies table for all processes on their machine unless Show shared tool assemblies is switched off above the table.
• Tools and assemblies now have an image field for a photo or diagram to make setup and calibration documentation easier.
  • Click the image cell to upload an image or view/update the existing image.
  • The image column is hidden by default in the tools table. To show it, click the Columns button and drag it into the Selected area.
  • The image column is always shown in the tool assemblies table.
• The inventory item selector in the tool editor is now searchable.
• In order mode, inventory items are now displayed in the table as long as their suggested quantity is greater than zero.
  • Entering a quantity of zero will no longer remove an item from the table.
  • Clearing the quantity field will display the suggested quantity.

Machines

• The proxy now looks up and reports the monitor ID for TMAC alarms. This means that TMAC alarms reported after installing this version will link to the specific recording from the event editor.
• Downtime categories can now be customized from by clicking "Downtime categories" in the machines section of the global settings window or the edit button next to the category dropdown in the downtime editor.
• Clicking the machine name at the top of a production page now shows a list of all machines with their current status, and clicking on a machine in the list will switch to its production page without resetting the date selection.
• Reworked parts are now listed next to scrapped parts under the production chart.
• When opening parts from the production chart, the part editor will have a States tab that shows the state history of the machine between the previous part and the selected part. This is not available for the first part of each day.

Processes

• The processes table now has a menu for each row that allows manipulating the process without opening its dedicated page first.
• This same menu is also available as a toolbar on each process's page.
• The changeover button in the process menu allows running a changeover from any other process to the selected process.

Other changes

• Italian translation has been completed.
• Fixed a bug where TMAC alarms falsely showed zero savings when reporting events in a notification.
• Added an API endpoint for showing (and optionally messaging) custom alerts: PUT /api/alerts
• Individual users can now turn on developer mode for themselves from the API keys section of the user settings window. This will display object IDs in tables and editors to make it easier to manipulate objects with the OnTakt API.

Client 2.1.6

8/16/2023

• Fixed an "error 404" popup when opening the tool editor to create a new tool.

Server 4.10.5, Client 2.1.5

8/14/2023

• Fixed tools without an inventory item being excluded from the tools column of the tool assemblies table, which falsely showed "Empty" without an expand button when there were no other tools in the assembly.
• Fixed manual date entry not working when the browser language is set to something other than English.
• Fixed process changeover alert title translations.
• Translated and internationalized reports.
• Removed the system check report as it was superseded in usefulness by the alert system years ago.

Server 4.10.4, Client 2.1.4, Proxy 2.7.4

8/08/2023

Tools

• When replacing tools that last replaced in test mode, there is now a confirmation to continue the test, and if confirmed, the tool can be indexed indefinitely.
• Added an "Import" button to inventory point menus for importing inventory counts from a spreadsheet file.
• The tables in the inventory verification window now show a part number column and allow searching by part number in addition to name.
• Tool usage days are now counted based on days with shifts scheduled instead of always Monday through Friday when "weekdays" is selected as the day counting type.

Reports

• Added a "Work report" button to tool menus that links to the reports page with the tool work report and tool already selected.
• Added optional tool and section parameters to the tool work report.
• The tool work report charts are now separated by time increment.
• The "Copy" button on the reports page now copies a link to the page with the report parameters filled in instead of copying a link to the report output.

Interface cleanup

• Date inputs now support typing in dates directly.
• Date range start and end inputs have been replaced with a unified date range input that allows selecting ranges on the calendar or typing in the range directly.
• Added per-user settings to hide display variables from machine cards and stop alarm flashing after a set interval.
• The shift bars at the top of production charts are now hidden by default, but can be enabled from the layers menu.
• Fixed the total number of corners not showing up in the tool usage column of the tools table and removed the number of corners remaining.
• The alerts pane can now be closed by clicking outside of it.
• New application icon.

Other changes

• The "last NC/TMAC contact" times will now only update when the proxy communicated with the machine and not when the proxy is just reporting a communication error.
• Spanish and German translations are complete.
• Fixed HTTP errors being returned as internal server errors with a support file.
• Delete button icons are now consistent.
• Fixed translation formatting error in proxy alert title.

Proxy 2.7.3

8/02/2023

Fixed XMC integration.

Server 4.10.3, Client 2.1.3, Proxy 2.7.2

7/27/2023

New features

• Machine states are now customizable. Learn more
• Multiple shifts can now be defined and assigned to machines. Learn more
• New report: utilization history.
• Users can now set their own idle and feed hold time limits for color fading.
• Downtime start/end times can now be set manually in the downtime editor.
• Server messages are now translated according to the Accept-Language header.

Bugs fixed

• Fixed reports failing to generate when only one machine is selected.
• Fixed audit log failing to record updates of objects with timestamp fields.
• Fixed machine custom alarms not matching correctly.
• Fixed kudos report failing to generate when downtime received kudos in the selected time window.
• Fixed kudos report failing to render emoji correctly.
• Report errors no longer appear as JSON (when report is requested with GET).
• Demo machine feed rate override values are now more realistic.

Server 4.10.2, Client 2.1.2, Proxy 2.7.1

7/13/2023

Machines

• Selecting tags in the machines page filter popup will show aggregated data from machines matching the filter.
• Utilization is now shown when expanding machine cards.
• Clicking programs table rows on the production page will now open the program editor.
• Machine feed rate override is now charted as a line instead of a gradient fill.
• Added a "false alarm" flag to events. The events report will call these out separately.
• Alarms can now be linked to downtime. The events report will show the value of an event from the value of its associated downtime.
• Programs can now be created manually before they are reported by a machine.
• When opening the downtime editor for a block that was previously set to auto-end and has already auto-ended, the downtime block will no longer reset to waiting for its end condition.
• Fixed machine cards failing to indicate current downtime for downtime that has no end time set.

Tools

• Tools table filter popup card will now close automatically when clicking outside of it.
• Fixed single-section tool notes showing line breaks as "<br>".
• Fixed "tool created successfully" message not being formatted correctly.

Inventory

• The header row of the inventory items table now stays fixed at the top when scrolling.
• When in order or receive mode, the selection sidebar for inventory items will shrink the rest of the page instead of covering the table.
• When in receive mode, entering a quantity greater than zero will select the row.
• Inventory page table columns can now be customized. Customizations are saved per-user and will apply on any computer a user logs into. Each mode (display, order, receive) has its own set of columns to customize.
• The tool number column of the inventory verification window is now sortable.

Reports

• Added a machine utilization report, which allows exporting custom state history charts.
• Added tool work report, charting work done by tools in TMAC alongside their replacement history.
• The report type list now has a search box at the top.

Other

• Overview charts can now be exported as CSV by clicking the download button in the window header.
• A notification channel can now be an email address instead of a webhook URL. This requires configuring an email server in the global notification settings to work.
• Event bus deletion messages can now have an array of deleted object IDs instead of just one, which should improve performance significantly when deleting hundreds or thousands parts in bulk.
• The audit log no longer stores all properties and instead stores only changed properties. This will reduce the size of the database significantly, so during the upgrade, unchanged properties will be removed from old audit log entries. This may take a few minutes depending on the size of the audit log table

Server 4.10.1, Client 2.1.1, Proxy 2.7.0

6/27/2023

New features

• More NC and TMAC alarm information is now recorded, including the alarm code and other machine-specific attributes.
• The alerts pane can now be filtered by alert severity.
• The machine card expanded details section has been redesigned to organize the information into NC and TMAC sections.
• OEE and tool history windows now scroll infinitely instead of needing to click "load more" each time.

Bugs fixed

• Fixed the part editor not saving changes when clicking OK.
• Fixed the part editor previous/next part buttons only working once after opening from a chart.
• Fixed tool replacements not showing up in the life chart of the tool history window after being edited.
• FANUC FOCAS machines that report a part count of zero will now be ignored until they report a different part count to avoid creating ghost parts when FOCAS falsely reports the part count as zero.
• Part counts in production chart context menu actions are now formatted correctly.

API changes

• The alarm format in machine state updates has changed from an object to an array of alarm objects. For more information, see the machine state format specification. This is not a breaking change yet because the server will still accept the old format.

Proxy 2.6.9

6/14/2023

• When reading FOCAS part counters, a read of zero will trigger a fallback read of a different variable to double-check.
• Additional checks when getting FOCAS alarms to avoid reading garbage characters.
• Partially successful FOCAS machine updates will now be sent to the server, which will report errors reading variables, feed rate override, emergency stop state, and alarms to the user as alerts instead of skipping the update.

Server 4.10.0, Client 2.1.0

6/14/2023

New features

• All users can now create their own API keys that provide the same level of access as their account.
  • A new API key should be created for each application that will use the OnTakt API. This allows revoking an API key without disrupting other applications' usage of the OnTakt API.
  • The global API token is no longer accessible, but it will still work for administrator-level access if already in use.
• NC and TMAC alarm indicators on machine cards are now icons instead of red squares for clarity.

Bugs fixed

• Shifts that cross midnight (start time is later in the day than end time) will no longer cause part goals to be negative, charts to have goals that decrease throughout the day, or machines to falsely show as "production stopped".
• Typing to search the "running processes" field of the inventory ordering form no longer fails to filter the list.
• Part and event report notification messages are now formatted correctly.

API changes

• The new API key system requires the use of Authorization: Bearer <API_KEY> instead of X-Auth-Token: <API_TOKEN>.
• Removed date and timeRange query parameters (deprecated in 4.9.1) from the following endpoints:
  • GET /api/machines/:id/goals
  • GET /api/machines/:id/chart
  • GET /api/processes/:id/chart
  • GET /api/programs/:id/chart
• Removed the day query parameter (deprecated in 4.9.1) from GET /api/parts.
• Removed the shift property (deprecated in 4.9.1) from the object returned by /chart endpoints.

Server 4.9.6, Client 2.0.5

6/13/2023

New features

• Importing tools with the spreadsheet template will now create inventory items if the "Durable" column is filled in.
• When importing tools with the spreadsheet template, assemblies will now be named after the first tool row with a given location.
• Added a setting that allows users of the "shop" access level to replace tools into test mode.
• The machine runtime report now also includes a pie chart showing the time spent in each execution state.
• Tools table column customizations are now stored per-user instead of per-computer, so custom layouts will follow each user no matter what computer they log in from, and they will not affect other users.
• The inventory item of the tool history window now shows the inventory item selected during the previous replacement/rebuild, so for each row it is the inventory item in use during that replacement's lifetime.
• Machine cards now change color when the machine is inside a downtime block.
• The per-program usage of a tool can now be viewed from the tool editor before replacing the tool.
• The margin and part report default filenames now include the selected start and end dates.

Bugs fixed

• The downtime report is no longer overly precise when displaying durations.
• Fixed not being able to click into fields of the user editor when opened from the options window.
• State history charts no longer fail to render immediately in Safari.
• Fixed some external links not working.
• Fixed release notes dialog sizing on mobile devices.
• Improved machines and tools page header button layout on mobile devices.
• Detect when report output pop-ups are blocked by Safari and show an error message.

Proxy 2.6.8

6/08/2023

• Support for reading the feed rate override from Okuma milling machines via MTConnect.
• Display variables for machines using FANUC FOCAS are now requested even when they are not used otherwise.

Client 2.0.4

6/08/2023

New features

• The columns of the tools table can now be reordered.
• Rename tool "location" to "Tool #" and warn when it is not set on a tool assembly.
• The last part count a machine reported is now shown in the variables tab of the machine editor.
• Machine card preview charts now wait to download and render chart data until they are scrolled into view to improve performance and reduce memory usage for instances with many machines.

Bugs fixed

• Fixed inventory table not sorting by order and receive quantities.
• Fixed tools table and processes table filter dropdowns showing the selected item's ID instead of its name when the page loads with a value already selected.
• Fixed machine card production chart previews growing outside their containers as new parts are rendered.
• Machine card production chart previews are now re-rendered when the available width for the chart changes due to resizing the window.
• Fixed tools table not sorting by type.
• Fixed production page downtime table not sorting by duration.
• Fixed awkward machine editor scrolling on small viewports.
• Fixed feed rate always rendering as solid black on production charts.
• TV mode will now autoplay correctly when the controls are hidden.

Client 2.0.3

6/06/2023

• Inventory verification window:
  • Fixed the location column of the "present tools" table always being blank.
  • Fixed the "other tools" table not showing any tools.
  • Fixed "remove from inventory point" button not working.
• Fixed file download spinners stopping before the file has been completely downloaded.

Client 2.0.2

6/05/2023

• Allow selecting which tools table columns to display.
• Clicking on an inventory point now opens the inventory verification window. Inventory points can be renamed from the actions menu instead.
• Fixed inventory verification window quantities resetting when focus leaves a quantity input field.
• Fixed tool notes and stickout display in the tools table.
• Limit height of machine card production chart thumbnails.

Server 4.9.5, Client 2.0.1

6/05/2023

• Added close button to top right of part and event editor windows.
• Fixed tools table not sorting by parts remaining when sorting by the usage column.
• Fixed "favorite machine" toggle button tooltip text.
• Fixed server error when deleting machines.
• Fixed server error when restoring database.

Client 2.0.0

6/05/2023

The OnTakt frontend/client application has been completely overhauled with a new interface. The layout and organization is the same as before, but the new framework behind the interface should offer increased performance and browser compatibility, with greater flexibility for future improvements.

The interface has also been prepared for translation, with several languages coming soon.

In addition to the UI rewrite, the following changes are included in this update:

New features

• The number of parts in the chart selection area is now shown in the context menu.
• The state history page now has an option to switch to week view instead of a single day.
• Tool type icons have been redesigned for improved clarity.
• OnTakt will now prompt to refresh the page after midnight to maintain performance and data consistency. If TV mode is active, the page will refresh without prompting.
• There is now a button in the user menu to send feedback or request support.
• Help buttons are now native browser links so the URL can be previewed by hovering.

Bugs fixed

• Variables reported by the machine with excessive floating point precision will now be rounded when used as a display variable.
• Machine utilization will no longer be incorrectly reported as less than 0% or greater than 100%.
• Machine state history charts should no longer sometime show incorrect times in tooltips.
• The "analyze historical run times" button is no longer shown in the process editor when creating a new process.

Server 4.9.4, Proxy 2.6.7

5/01/2023

• Added machine model for DMG MORI via MTConnect.
• Added machine system for connecting to XMC.
• Paths can now be specified in NC URLs when using MTConnect. This is only required for DMG MORI machines at this time.
• The system check report is no longer incorrectly listed as a spreadsheet.

Server 4.9.3, Client 1.6.4

4/26/2023

• Fixed the daily goal always being zero for days where a machine has not yet finished a part.
• Inventory items are now correctly removed from the suggested order list when they are no longer needed after deselecting processes from the run list.
• Fixed an error that occurred when creating a missing variable alert for a machine that does not have a process loaded, resulting in no alert shown.

Client 1.6.3

4/24/2023

• Fixed date inputs in variable chart and shift notes.
• Fixed utilization calculating incorrectly when the first state of the day is not an active state.

Client 1.6.2

4/21/2023

• Fixed date/time input for manual part creation and maintenance entries.

Server 4.9.2

4/20/2023

• Fixed machine goals always charting as zero.

Server 4.9.1, Client 1.6.1

4/20/2023

New features

• Combined tool & assembly creator makes it easier to get started entering tool data.
• The state history chart for the selected time window is now shown under production charts.
• Tool assembly tables now show the tool types each assembly contains for faster identification.
• There is now a warning icon on a machine's card in place of a process if there is no active process.

Bugs fixed

• The utilization calculation displayed above state history charts will now update in real time as the chart updates.
• Only time in the past is considered when calculating utilization, so it will no longer be lower earlier in the day.
• Better context menu event handling for charts to improve the states page on mobile devices.
• The time range of state history charts is now defined by the server's time zone.
• State history charts now include the first and last state in the selected time range even if extends outside the range.
• The order of machines will no longer update to reflect changes from another client until the page is refreshed.
• Production charts will now always clip to the selected time window.
• Fixed production chart date navigation moving one day at a time when set to week mode.
• Fixed server error when creating a tool without a maintenance status specified.

API changes

• Process.last_cycle is now an object with finished and program_id fields instead of an array of the part's timestamp, the machine's ID, and the machine's name. This is not considered a breaking change because the last_value field for processes was not documented, but it is now in the API models documentation.
• Added start and end parameters to the following endpoints, deprecating their date and timeRange parameters:
  • GET /api/machines/:id/chart
  • GET /api/machines/:id/goals
  • GET /api/processes/:id/chart
  • GET /api/programs/:id/chart
• If the start and end timestamps supplied to GET /api/machines/:id/chart extend beyond a single day, the returned shift.start and shift.end values will be the start of the shift on the first day and the end of the shift on the last day. The shift object returned by this endpoint is now deprecated for this reason.

Server 4.9.0, Client 1.6.0

4/11/2023

New features

• Machine states are now recorded. This can be viewed from the States page.
• Downtime can now be set to end automatically when the machine either produces a part or becomes active.
• Users can now choose the page they see by default when opening OnTakt.
• Tool replacements can now be only one of: broken, scheduled, or preemptive.
• Tool changeovers can now be performed in advance by clicking the Changeover button on a process in the processes table.
• Programs that are not in a process (unassigned programs) are now displayed alongside processes instead of on their own page.
• Tools can now be filtered by warning state, so only tools that are past their warning life threshold are shown. This is enabled by default to reduce page load time, but it can be disabled to show all tools from the filter menu.
• The inventory page is now a top-level navigation item.
• The tool assemblies page has been removed from the main navigation and is now accessible from the tools page.
• Machine states can now be mapped for customization or compatibility.
• The notification channel selection radio buttons have been replaced with a searchable drop-down.

Bugs fixed

• Fixed tool creation window not loading correctly.
• Fixed server error when reporting downtime without specifying a category.
• Fixed server error when completing a maintenance reminder.
• Fixed server error when an inventory point contains an invalid (non-integral) quantity of a tool.
• The x-axes of variable charts are now aligned even when a part does not have a value for the given variable.
• Fixed the selection in the machine drop-down of the maintenance item creator jumping to the top every time new machine data arrives.
• Tool usage counts are now formatted correctly (with thousands separators) in the usage column of the tools table.
• Preemptive tool replacements are no longer counted in average tool life.

Reports

• Added a downtime report that analyzes downtime by cause.
• The reports page now shows a brief description of each report and an icon indicating whether it returns a webpage or a spreadsheet.
• Reports that return webpages are now opened in new windows to allow side-by-side viewing.
• The margin (formerly profit) report now has a "total margin" column.
• The margin report can now be broken into a chosen interval.
• The tool usage report now includes tool cost.
• The parts report no longer falsely reports 0 parts for some days.
• Machine runtime reports no longer have blanks for missing process IDs.
• Machine runtime reports now calculate total time correctly.

API changes

• The broken, preemptive, and scheduled fields of tool replacements are now stored as one field, where 1 means broken, 2 means preemptive, and 3 means scheduled.
• The GET /api/tools endpoint now has a warn_life query parameter that only returns tools past their warning life threshold.
• The CSV export report has been removed. All the data it could export is accessible via the API, and database exports can be downloaded for offline processing instead.
• The "new process is not loaded on the machine" error returned by POST /api/processes/:from/changeover/:to now has a dedicated response status of HTTP 412.
• POST /api/processes/:from/changeover/:to now has a planned query parameter that bypasses the 412 return code.

Server 4.8.10, Client 1.5.17

3/29/2023

New features

• Added downtime tracking.
• Added tool replacement test mode.
• Added "scheduled" as a tool replacement reason and changed "damage types" to "tool condition".
• When manually creating parts, it is now possible to change the program and timestamp.
• Inventory items can now have a minimum on-hand quantity in addition to the existing safety stock days.
  • Added "minimum on-hand quantity" and "safety stock" columns to inventory item table in "order" mode.
  • Added "brand" and "corners" columns to inventory item table in all modes.
• Tables under production charts will no longer be shown if they are empty.
• Maintenance issues now appear when entering shift notes.
• Audit logs and the trash are now filtered by date.
• The parts report can now be broken up into a chosen interval, and it is now returned as a Microsoft Excel spreadsheet.
• Improved chart context menu layout.

Bugs fixed

• Fixed some help buttons linking to "#undefined" on the knowledge base pages.
• Tables in report output had invisible text in dark mode.
• Fix error in TMAC alert handling.
• Fixed server error when loading shift notes.

API changes

• Added start and end parameters to the following endpoints to allow filtering results by time:
  • GET /api/maintenance/issues
  • GET /api/auditLog
  • GET /api/auditLog/user/:user_id
  • GET /api/auditLog/action/:action
  • GET /api/auditLog/:object_type/:object_id
  • GET /api/auditLog/trash
• Fixed typo of machine filter parameter name in documentation of GET /api/maintenance/issues.
• Maintenance issue objects now include downtime information.
• The program_filename field of POST /api/parts/create has been changed to program_id in both name and behavior.

Server 4.8.9, Client 1.5.16, Proxy 2.6.6

3/22/2023

New features

• Tool assemblies can now be linked to TMAC alarms. This will happen automatically if there is an assembly with the location indicated in the TMAC alarm, and the relevant tool can be changed for any TMAC alarm in the event editor.
• Tool assemblies linked to TMAC alarms will appear in the alarm's table row under production charts.
• When rebuilding a durable tool, if the chosen substitute tool is already in an assembly, it will now offer an option to move the tool from that assembly automatically.
• There is now a "tool replacement minimum usage" setting. When replacing tools with usage below this threshold, either flag selection or notes entry will be required.
• Tool life expectancy alerts now have a button to open the editor for the affected tool.
• There are now more specific "broken" tool conditions. When replacing a broken tool, one of these options may be chosen, otherwise note entry will be required.
• There is now a per-machine setting that will send changeover messages to the machine's notification channel.
• The proxy will now report errors it encounters while communicating with TMAC to the server and they will appear in the alerts pane alongside NC communication alerts.
• Tool assemblies can now be created from inside the tool editor.
• Tool assemblies can now be created from the process page tool assemblies table.
• Release notes are now pulled from the knowledge base for only the current software versions.

Bugs fixed

• Variable charts will no longer show incorrect values in part tooltips when parts are added to the chart.
• TMAC alarm lines on charts will no longer appear as the wrong color or with the wrong tooltip after navigating between production days.
• Suggested process alerts will no longer suggest processes from machines other than the program's own.

Server 4.8.8, Client 1.5.15

3/06/2023

New features

• Editing tool replacement part counts and day counts is now allowed.
• During durable tool rebuild, the substitute tool (if selected) is now recorded and displayed in the tool's history.
• Part and day counts in the tool history window are now formatted with thousands separators according to the browser's language settings.
• TMAC event details are now displayed in a simpler format.
• Process tool replacement history charts now load one year of data at a time to reduce load time and browser memory usage.
• Replacements of tools that were replaced while they were not assigned to a process now show an indicator in the machine tool replacements table under production charts explaining why they appear on all machines.

Bugs fixed

• Variable charts now include parts that don't have all the specified variables, but do have at least one.
• The displayed part count of a tool replacement is no longer cleared when saving the tool replacement. No part count data was permanently lost, but it would not be shown until the page was refreshed.
• NC alarm names will now have leading and trailing spaces removed before being saved to the database. Previous alarms already in the database will be cleaned up during the update.

API changes

• Fixed variable parameters on GET /api/parts behaving like var[NAME] parameters (all must be present instead of any must be present).
• Added optional start and end parameters to GET /api/tools/replacements/process/:id to narrow results by time

Server 4.8.7, Client 1.5.14

2/22/2023

New features

• Maintenance items can now be scheduled by machine runtime in addition to normal clock time.
• When selecting a substitute tool in the durable tool replace wizard, there is now an option to show only tools that are "ready for use".
• There is now a button to edit processes directly from the processes page without first opening a process.
• The program editor can now be opened directly from machine cards by clicking the program name.
• When undoing audit log entries, the undo button now indicates progress and success states.
• Process cycle time can now be entered in different time units.

Bugs fixed

• Tool replacements will no longer fail to render in the shift notes wizard.
• Some mapped variables were failing to save when parts were produced. This should be fixed now.
• Fixed machine goal alerts not firing.
• Help links have been updated to point to the new knowledge base page locations.
• Fixed a rare divide-by-zero error when calculating a machine's status color.
• Single-machine processes (the fact that processes can only contain programs from one machine) is now enforced by the database to prevent assignment errors by the server.
• Fixed machine deletion messages not getting sent to the proxy, causing the proxy to continue attempting to communicate with it and possibly fill the log with errors.
• Audit logs and the trash list will now load much faster.

Breaking changes

• Removed API endpoint POST /api/processes/updateCycleTimes. Use PATCH /api/processes/:id for each process individually instead

Server 4.8.6, Proxy 2.6.5

2/08/2023

• Changes process run times in machine run report from running total to individual.
• Maintenance reminders will now only be sent once between entries.
• Machine part counts are once again exposed via the API as Machine.last_part_count. Note that if a machine is using a variable as a part counter, this will be the last reported value of the selected variable instead of the control's part counter.
• Improves proxy log message when a machine is missing a TMAC API key

Client 1.5.13, Server 4.8.5, Proxy 2.6.4

2/07/2023

New features

• There is now an export button in the variable chart window that will download the displayed data as a CSV file for offline analysis.
• Tool replacements are now listed in a table under production charts.
• Support for Mazak MAZATROL controls via MTConnect has been added.
• A new "machine runtime" report has been added that breaks down the total time the machine spent running during a selected timeframe by process.
• Tools now have a "replacement duration" field to store the amount of time it should take to perform a tool replacement. This field is not yet used by OnTakt internally, but it is available for data entry.
• Tools now have an "offset number" field to store the offset of the tool's data in the machine control's memory. This field is also not used by OnTakt internally at this time.
• The tool torque specification field now allows a choice between metric (N⋅m) and imperial (lb⋅ft) units. This is for reference only so conversion is not performed automatically.
• Tools without a life set have their usage column highlighted green in the tools table to indicate that they should be checked for wear more often until their first replacement.
• Use searchable dropdowns instead of system dropdowns where possible. This makes finding items in the list faster and allows them to appear in single-window in-browser screen captures.

Bugs fixed

• Fixed the internal server error that occurred when deleting machines.
• Non-integral numbers are now allowed in the "notify when" field of the common variable mapping window.
• In the case where a machine selection dropdown is opened when a value is already selected, it will no longer jump back to the top of the list when machine data is updated.
• The NC authentication field (which may be named differently depending on a machine's system type) will no longer be clobbered by saving changes to a machine without entering a new value.
• The report output viewport now has a light background to match its printed appearance even when the dark color scheme is selected by the operating system.
• "Machine not configured" alerts will no longer show up for machines of the "custom" system type

Server 4.8.4, Client 1.5.12, Proxy 2.6.3

1/31/2023

New features

• For each machine, you can now specify the maximum length of time TMAC monitoring can be disabled before a warning notification is sent to its notification channel. This message will have a link to the TMAC web interface.
• You can now select a display variable for a process to show its value on the machine's color chip while the process is loaded.
• There are now "select all" and "deselect all" buttons in the tool changeover verification window.
• Machine variables are now always sent with machine objects, so the variables display in the machine editor can now update in real time instead of requiring a refresh button click.
• The tool assembly editor now has buttons to add or create tools directly.
• If an "Open in TMAC" button is disabled in the event editor, a message will now explain why.
• If someone else edits the notes of a part or event you are editing, it will prompt you to accept their changes or keep your own. If the part or event is deleted, the editor will close and explain why.
• Tools can now be bulk-imported into a process by downloading a spreadsheet template from the process's details page under the tool assemblies table.
• Added a button to duplicate maintenance items.
• The time zone list in the options window is now searchable.

Kudos to you

To encourage helpful notes, you can now give kudos to other users for good documentation by clicking the reaction emoji under a note. You can choose your own personal reaction emoji in your user settings. Managers can run a kudos report to see which users received the most kudos in a given time period.

Which user gets credit for the helpful note depends on the target: for tool replacements this will be the user who replaced the tool; for parts and events it will be whoever last saved changes; and for maintenance entries and issues it will be whoever created the entry or issue.

Bugs fixed

• Fixed "assigned to any loaded process" tool table filter returning all tools.
• In the tool replacement wizard, the substitute tool selection is now cleared when the tool substitution option is unchecked, so the server will no longer reject these replacements.
• The "create inventory item" button in the tool editor now correctly selects the newly created item.
• In the variable mapping window, variables set to "never notify" will no longer show a useless and confusing value entry field.
• The "Add to inventory point" option when selecting inventory items now works again.
• Fixed "chamfer fill" typo of "chamfer mill" tool types.
• The job ID field of TMAC events should now be populated for future alarms.
• NC alarms from machines using FOCAS should no longer have garbage trailing characters.

Breaking changes

• Restoring database backups is no longer allowed via the API. Use the service management panel instead.
• Now only administrators can change the time zone and global shift time options. Machine-specific shift times can still be set by planners

Client 1.5.11, Server 4.8.3

1/05/2023

New features

• Added an option to filter inventory items by active machine when in receive mode.
• Added a button to load more audit log entries at the bottom of the list.
• Added help text to inventory item order and receive tabs.
• Improved performance of part, event, and tool replacement queries and charting.

Bugs fixed

• OctoPrint machines in the "finishing" state are now treated as running instead of idle.
• Many parts created at the same time will no longer be removed during upgrade

Proxy 2.6.2

1/04/2023

• Fixes a segmentation fault that occurred when there was an error parsing MTConnect XML

Client 1.5.10, Server 4.8.2

12/20/2022

New features

• The processes table can now be filtered by machine.
• The total number of tools is now displayed on the tools page filter button.
• The total number of tool assemblies is now displayed on the tool assemblies page filter button.
• If a substitute tool is specified when replacing a durable tool, the substitute tool's status is automatically set to "in service". The "received from rebuild" status is no longer available for selection in the web interface, but tools that already have this status will continue to display it, and tools can still be assigned this status via the API.
• When duplicating an assembly, new names can now be specified for tools set to be duplicated.

Bugs fixed

• Fixed the maintenance page machine selection not filtering maintenance issues table.
• Fixed "move selected items to another inventory point" not working in the inventory verification window.
• Dropdowns no longer scroll horizontally.
• Unknown tool maintenances states will no longer cause errors during page rendering, and will instead show up as "(Unknown status)".
• Percentage-based tool life tracking is no longer used for alerts, so the tool life reported in alerts and notifications will now match the tool life displayed in the OnTakt interface.

API changes

• /api/parts now allows specifying multiple machines, and the preferred parameter name is now machine_id instead of machine.
• Added /api/parts/:id for getting details of a single part.
• The tmac_3 field has been removed from the Machine type. OnTakt has not supported TMAC MP for over a year.
• The inspection_part_id field has been removed from the Part type. Parts are now referenced from the Inspection side

Client 1.5.9, Server 4.8.1, Proxy 2.6.1

12/13/2022

New features

• Feed rate override is available as a layer on production charts. Turn on the "Feed rate" switch under a chart to see it.
• Feed rate override can now be read from machines with FANUC controls.
• In the variable charting window, only variables that exist on parts produced in the selected time range are listed.

Bugs fixed

• The y-axis range of charted variables is no longer required to contain zero.
• Audit log tables were not rendering correctly

Client 1.5.7, Server 4.8.0, Proxy 2.6.0

12/07/2022

New features

• Tools now have a number of "slots". This determines how many inventory items to consume during a replacement/rebuild of the tool, is displayed next to the item name in the tool replacement/rebuild wizard, and will multiply order quantities.
• The part count variable can now again be set for a machine, allowing parts from programs not in a process to count parts. If the active process on a machine has a part count variable of its own, it will override the machine's setting as long as the process is loaded.
• Added a toggle in the part variable charting window to switch the x-axis of the charts from time to number of parts for even spacing.
• Added a goal calculator to the process editor that will allow setting the cycle time by entering the number of parts that should be produced during each shift.

Bugs fixed

• Fix server error when rebuilding a durable tool with a substitute tool selected.
• Improved reliability of data from FANUC controls by disconnecting from and reconnecting to the control each time the proxy updates machine data. This was the behavior of proxy versions <2.5.0.
• Fix TMAC data not being recorded on the server

Breaking API changes

• Removed /api/parts/withVariables. Use /api/parts with variable parameter(s) instead.
• Deprecated the day parameter of /api/parts, and it may be removed in a future server update. Use the new start and end parameters instead

Client 1.5.6, Server 4.7.6, Proxy 2.5.1

11/30/2022

New features

• A message will be sent to a machine's notification channel when it has not produced a part on schedule. This can be disabled in each machine's notification settings.
• Line breaks in tool notes are now displayed in the tools table

Bugs fixed

• Client version 1.5.5 displayed goals incorrectly in machine cards.
• Server version 4.7.5 failed to create parts for programs not belonging to a process.
• Demo machines will no longer generate negative feed rate override values

Client 1.5.5, Server 4.7.5, Proxy 2.5.0

11/29/2022

New features

• Production chart pages now include a table breaking down the number of parts produced by program and part flags.
• Added Previous and Next buttons to the part editor that navigate between parts in the order they appear on the chart.
• Report generation errors now return a support file.
• Experimental support for adding 3D printers run by OctoPrint as machines. Part counting may be unreliable at this time.
• Haas macro variables are now numbered consistently with the control's numbering scheme.
• Requests for data from machines are now offset by random sub-second times in order to reduce network load caused by all machines sending data at the same time.

Bugs fixed

• Programs without names will no longer cause a suggested process alert.
• Tool usage report generation no longer fails with an error when some tools do not have an inventory item set.
• The location column of the inventory verification window now shows values again.
• The tool usage tab of the part editor will now display correctly when there are tools that are not in an assembly.

Breaking changes

• Demo machines must now have the demo system type explicitly selected in machine settings.
• The goals data item returned by /api/machines/:id/chart is now an array of arrays instead of an object.
• /socket/proxy/:machineId/:dataSrc has been removed. Use the new /socket/proxy with tagged messages instead. The proxy now uses a single socket communicate with the server for all machines instead of one per machine and TMAC unit to reduce the number of concurrent network connections each must maintain.
• MTConnect XML parsing now happens on the proxy instead of the server. This should not change any behavior and offers the benefit of increased performance, but there may be unforeseen inconsistencies in data handling

Client 1.5.4

11/22/2022

• Fixed a bug in the part editor's tool life table that prevented tool locations from showing up.
• The part editor's tool life table now also displays the usage as a progress bar.
• Date/time display formatting uses the browser's language setting

Server 4.7.4

11/17/2022

• Fixed part variables not being saved during part creation.

Client 1.5.3, Server 4.7.3

11/17/2022

New features

• Variables recorded on a part can now be edited.
• Clicking on a part from a part variable chart will now open a new part editor instead of closing the chart and reusing the existing editor window.
• Part variable chart formatting has been improved.

Bugs fixed

• Parts without a value for a variable will no longer cause errors in the variable charts. Instead, they will be skipped on the chart.
• When a variable is not being reported, showing the alert will no longer cause a database write loop

Client 1.5.2, Server 4.7.2

11/16/2022

• Fixes a bug where mapped variables do not get saved with parts.
• Chart context menus will no longer run off the right edge of the screen.
• The variable list in the machine editor now behaves more predictably.
• Fixes a typo in the missing variable system alert

Client 1.5.1, Server 4.7.1

11/16/2022

• Fixes a bug where every part produced on a machine would create two parts in OnTakt. This update will automatically remove duplicate parts and restore tool life during installation.
• Fixes multiple parts created at the same time being connected in the wrong order on part charts when using Safari or Chromium-based browsers like Google Chrome and Microsoft Edge:[[File:20221115_sawtooth.png|sawtooth and fixed charts]

Client 1.5.0, Server 4.7.0, Proxy 2.4.2

11/14/2022

Processes

Program groups have been replaced with processes, which are containers for a machine, programs, tool assemblies, and settings that define a real-world process.

During the upgrade

• Program groups that contain at least one program will be converted to processes automatically.
• If a program group contains programs from multiple machines, the machine to which the most programs belong will be kept in the process, and all other programs will be ungrouped.
• Settings from a group's programs will be combined into the settings for the process using the following rules:
  • Common variable map: merge all program maps into one superset map
  • Cycle time: average of program settings
  • Parts per cycle: most common of program settings
  • Part count variable: most common of program settings
• Tools that are assigned to program groups and already in assemblies and will have their assembly added to the new process created for the program group.
• Tools that are assigned to program groups but not in an assembly will be placed into new assemblies named with the program group and tool location, and then the new assembly will be added to the new process. If multiple tools assigned to the same program group are in the same location, they will be added to the same assembly.
• Tool reorder notifications are now configured in the options window.

Other new features

• Tool assemblies can now be duplicated.
• Tool assemblies can now be merged.
• Tools now have a "torque specification" field.
• Added tool types for holders and bodies.
• Changed labels on tool replacement cancellation confirmation buttons to be more intuitive.
• Allow shop users to edit event notes.
• Added an API endpoint (POST /api/machines/:id/update) and a "custom" machine system type for building custom machine integrations using Caron MiConnect or other software.
• Tool assembly and location are now shown in the tool replacement detail window.
• View combined replacement and rebuild history for all tools in an assembly.
• Tool rebuild status is shown in the notes column of the tools table for tools that have it set.
• Mark parts as "reworked" and they will appear yellow in part charts
• In addition to selecting many parts at once to scrap, you can now remove their scrapped status and change their reworked status in bulk as well. Just right-click the part selection and click "Flag".
• Inventory items now have only one part number for all suppliers.
• Tools will keep track of which inventory item they were using at the time of replacement to allow for easier analysis of longevity between equivalent items.

Bugs fixed

• Fix "Add Supplier" button not working when creating a new inventory item.
• Fix the audit log undo button not working in most cases.
• Show undefined OEE as 0% instead of N/A.
• Fix error when deleting a tool that is in an assembly.
• Tool active time ("in use for x days") was shown in tools table even when the lifetime expectancy was not set on the tool.

FANUC compatibility improvements

• The proxy now reads the main program instead of the current sub-program, so program names should now be consistent between parts.
• To improve communication reliability, only variables set in OnTakt for program selection, part counting, or in the current process's variable map will be read from the machine.
• Feed rate override is now read from machines with FANUC controls.

Known issues

• Tool replacements created prior to updating will show up on all production charts of all machines. This is because the data associating tool replacements to a machine was not previously recorded. Tool replacements created after updating will be associated to a given process and therefore only a single machine.
• If tools are assigned to multiple program groups, it is not determinate which process they will end up assigned to. This should be reviewed manually after the upgrade.
• Downgrading after installing this upgrade will result in a loss of data (tool and program assignments will be removed), so make sure to take a backup of the OnTakt database before upgrading to this version.

Breaking changes

Functionality

• Program groups have been removed and more or less replaced by processes.
• Tools cannot be directly assigned to programs or processes; they must be placed into an assembly and then the assembly can be assigned to a process.
• When sorting the tools table by usage, tools without a part life set are now treated as having an infinite part life

Data model

• Tools no longer have a location directly; this must be set on their assembly.
• part_count_cv can no longer be set on a machine directly; it must be set on a process.
• time_per_part, cv_map, parts_per_cycle, and part_count_cv can no longer be set on programs directly; they must be set on a process.
• Tools no longer have a redundant monitoring property. If the monitoring_dest property is set to a non-null value, monitoring is enabled.
• The ToolOrderItem type has been renamed to InventoryItem.
• The order_item and order_item_id properties of the Tool type have been renamed to inventory_item and inventory_item_id.

API

• Removed /api/program_groups/...
• Moved GET /api/programs/variables to GET /api/processes/variables
• Replaced GET /api/tools/replacements/program/:id with GET /api/tools/replacements/process/:id
• Removed POST /api/parts/scrap; call POST /api/parts/flag with {"scrapped": true} instead.
• The order_item query parameter of GET /api/tools/ has been renamed to inventory_item.
• The order_items field returned by POST /api/tools/inventory/:id/receiveOrder is now called inventory_items

Server 4.6.6

10/20/2022

• Fix error when clearing database before restoring a backup

Server 4.6.5

10/20/2022

• Update Microsoft Teams webhook support to support their new URL format

Client 1.4.6, Server 4.6.4

9/21/2022

• All NC alarms can now send notifications, not just those with "ALARM_A" in their name.
• Added buttons in the notifications tab of the options window to send a test message to configured notification channels.
• Disabled the "Finish" button of the tool replacement wizard while the replacement is submitting to reduce double-submissions

Client 1.4.5, Server 4.6.3

9/21/2022

New features

• Users can now edit notes and conditions of previous tool replacements.
• Added a help page describing machine colors.

Bugs fixed

• When creating tool order items, only the name entered was saved, but now all fields work correctly.
• After creating a tool order item from the inventory tab of the tool editor, the newly created item will once again be selected automatically

Client 1.4.4

9/08/2022

• New tool types:
  • Boring: Burnisher, Tap, Thread mill
  • Cutting: Ballnose endmill, Chamfer mill, Double chamfer mill, Dovetail, Groover, Radial endmill
  • Durable: Drive, EDM electrode pins, Filter
  • Inserts: Groover, Rougher
  • Other: Hone, Part-off blade
• New icons for existing tool types:
  • Boring: Reamer
  • Cutting: Endmil

Client 1.4.3

9/06/2022

• Fixed a bug where good and total part counts would not update correctly in part chart tooltips after navigating between days or scrapping parts.
• Added good, scrapped, and total part counts to the overview cards on the machines page

Client 1.4.2

8/25/2022

• Fixed a memory leak on the tools page that caused the browser tab to crash or the browser to reject network requests depending on when the memory limit for the tab was reached.
• Offer to refresh the page if the server reports a different version after the event bus has reconnected

Server 4.6.2

8/24/2022

• Fixed a bug that prevents database changes from being saved when an external notification is sent by the action that made the changes

Client 1.4.1, Server 4.6.1

8/23/2022

• Now you can select along the x-axis of tool replacement life charts to limit the replacements shown in the table.
• Added tool, section, and time increment columns in the TMAC events table on machine production pages.
• Added a dropdown to the tool editor to change which assembly the tool belongs to.
• Internal server changes for better database performance and parity with Inspection

Client 1.4.0, Server 4.6.0

8/10/2022

New features

• Field to enter brand of tool order items.
• Field to enter pack quantity of tool order items to round up to a multiple of it when generating orders.
• Simplified order spreadsheet columns.
• When rebuilding durable tools, the location field of the original tool will be moved to the substitute tool.

Bugs fixed

• Check tool list when adding to assembly to prevent database corruption.

Breaking changes

• For API users: Tool.folder has been removed.
• Some server code has been extracted and merged with redundant code from Inspection into WPU, so there may be new bugs introduced for edge cases

Client 1.3.2

8/08/2022

• Start the y-axis of tool life charts at zero

Client 1.3.1

8/08/2022

• Fixes an issue where turning the tool history window chart on, off, and back on would freeze the page

Client 1.3.0, Server 4.5.0

8/08/2022

• Added maintenance module for scheduling repeated maintenance tasks or measurements, and for logging/tracking machine issues
• Added tool life chart to tool replacement history window
• Fixed time rounding in production chart compare mode

Client 1.2.1

7/27/2022

• Fixes a bug introduced in client 1.2.0 that caused the tools table Usage column to sort by part count instead of parts remaining. After installing client 1.2.1, it will sort by parts remaining again

Client 1.2.0, Server 4.4.0, Proxy 2.4.0

7/27/2022 This update can take a few minutes longer than usual to install because usage breakdowns for all existing tool replacements must be back-calculated. During this time, OnTakt may not be available. Please keep this in mind while deciding when to install this update.

New features

• Click the pin button for a tool on the tools page to keep it at the top of the table when sorting. The pinned state of a tool is shared across all users.
• Tool replacement breakdowns are saved when the tool is replaced, so the data will not change if the tool is unassigned from programs/groups.
• Durable tool rebuild status is now tracked and can be set in the tool editor or from the rebuild wizard.
• For machines with FANUC controls, the reported program name will now be populated with the program's comment if one is set on the control.

Bugs fixed

Production monitoring

• TMAC alarms are now correctly color-coded in charts.
• Compare mode on part charts now counts all parts between the selected parts, including both endpoints, regardless of their scrapped status.
• The "launch TMAC job editor" button in the event window now works correctly. This only applies to TMAC events recorded after installing server version 4.4.0 and proxy version 2.4.0.
• Part and event editor windows now open reliably when using the buttons in the tables on the machine production pages instead of clicking on the chart.

Reporting

• Production overview (heatmap) windows now clear when opening instead of showing irrelevant data.
• Production overview generation is now more accurate when counting parts produced shortly before or after midnight, and about 53 times faster overall.
• Periodic machine reports sent to Slack/Teams will now be for the current day instead of yesterday.

Tool management

• Favorite tools are now respected by all tool filter modes.
• Tool replacements that index the tool past the number of corners set on the order item will be rejected.

Machine connection

• The current part count is now read at the correct memory address from FANUC controls, so it is no longer necessary to use a macro variable for all programs.
• Alarm names are now read at the correct memory address from FANUC controls, so they will no longer show up missing the first four characters.
• For TMAC alarms, the jobId field will contain the ID of the current job, in addition to the current job field that contains its name.

Breaking changes

• The physical attributes tab of the tool order item editor has been removed. This data is still accessible for reading and writing via the API.
• For API users: /api/tools/replacements/:id/usage has been removed. Read the parts property of returned ToolReplacement objects instead

Client 1.1.8, Server 4.3.0

7/19/2022

• Added a checkbox to move assignments to a substitute tool when rebuilding durable tools
• Show full alarm text for Haas machines using MTConnect
• Breaking change for API users: POST /api/tools has been removed. Use PUT /api/tools to create tools instead

Server 4.2.9

7/14/2022

• Changed the name of the login session cookie to avoid conflicting with Inspection

Client 1.1.7, Server 4.2.8

7/14/2022

New features

• Tools now track how many days they have been in use, and there is an option to set a threshold that will trigger a warning notification and show time usage in the tools table.
• Show tool ID in the tool editor's info tab

Bugs fixed

• Fixed an issue that caused internal server errors when using the API key to authenticate requests to some protected endpoints

Client 1.1.6, Server 4.2.7

7/11/2022

• Program group tool replacement charts now include replacements of tools assigned to individual programs in the group.
• The program/group tool replacement history chart windows now open immediately and show a loading indicator instead of appearing to do nothing while loading and rendering.
• Internal change to how users are loaded from the database during session creation (login) and session restoration (after, for example, a browser restart)

Client 1.1.5, Server 4.2.6

7/06/2022

New features

• View all the tools using an inventory item by clicking the tools button next to it on the inventory page.
• The release notes window can now be opened from the user menu in the navigation bar. Also, there is now a user menu in the navigation bar.

Bugs fixed

• Tool order calculations were not counting all usages of the tool.
• The login screen and help pages now load correctly when using OnTakt from a computer that does not have internet access

Client 1.1.4, Server 4.2.5

7/05/2022

New features

• Tables under machine production pages now have buttons to open the same detail windows as clicking on the chart objects.
• Tool page can be filtered by machine.
• Inventory page can be filtered by machine.

Bugs fixed

• The job editor button in the event details window that links into the TMAC web interface now works correctly. The alarm metadata needed for this to work is only available for alarms recorded after installing OnTakt Server 4.2.5 and TMAC 3.1.3 (build 977) or newer

Client 1.1.3, Server 4.2.4

6/22/2022

New features

• Shift notes: expand a machine card and click the Shift Notes button to quickly check and/or enter notes for all the TMAC alarms, scrapped parts, tool changes, and OEE for a single machine on a given day.
• Don't suggest grouping unnamed programs (in format "O#")

Bugs fixed

• Fix error when replacing tools without an inventory point set.
• Notification destinations can now only have one channel selected.
• Don't close the tool replace window until it saves successfully.
• Round tool/corner usage numbers for display to avoid overflow

Server 4.2.3

6/16/2022

• Event reports sent to Slack and Teams are now flat text because these applications do not render tables. Event reports run manually are still formatted as tables.
• Database migrations can once again run in reverse without crashing

Client 1.1.1, Server 4.2.2

6/16/2022

New features

• Tool stock remaining time report.
• Tool stock out notifications (enable in Options → Tools).
• Tool life analysis mode on the tool table.

Bugs fixed

• Replacing a tool that is assigned to multiple loaded programs no longer causes an error.
• Tool replacement window would not open for tools without an order item set.
• Correct tooltip units on production heatmaps.

Breaking changes

• Removed /api/programs/find

Server 4.2.1

6/07/2022

• Fixed OEE availability calculation

Client 1.1.0, Server 4.2.0

6/07/2022

New features

• Added a safety stock field to tool inventory items. When ordering, it will ensure there are enough replacements to continue production on the chosen number of days.
• Added a button to delete tool replacements.
• There is also an undo button on the most recent tool replacement that will revert the tool's life and restore an inventory item.
• Added a button to learn cycle times for selected programs. This only updates programs that do not already have a cycle time set.
• Machine alarms are now included in the Event report.

Bugs fixed

• Existing program/group selections in the tool table filters were showing as their ID instead of their name.
• The "reorder quantity" field label was missing in the tool editor.

Breaking API changes

• Removed /api/programs/names in favor of reading the various name fields from /api/programs

Client 1.0.23

6/01/2022

• Fixes all checkboxes showing "null" when filtering tools to order by selecting programs

Client 1.0.22, Server 4.1.12

6/01/2022

New features

• Search program and program group filter lists in the tools table.
• Bulk select/deselect programs in the programs table.
• Show explanation when program production cannot be forecast.
• Option to hide program breakdowns in the tool replacement history window.

Bugs fixed

• Unexpected logouts due to a new browser security rule

Client 1.0.21, Server 4.1.11

5/12/2022

• Overlay machine name on production chart instead of showing underneath.
• Better machine status time display format.
• Fix OEE performance calculation.
• Document OEE calculations in help pages

Client 1.0.20, Server 4.1.10

5/10/2022

New features

• Favorite tools per-user for quick access.
• Override program names and provide program descriptions.
• Calculate OEE and store historical OEE calculations and score breakdowns.
• When replacing a tool, the "tool was indexed" box is now checked by default if indexing is possible.
• Store part count at time of tool replacement (provides an "other" listing in the history window).
• More information in support files.

Bugs fixed

• Deleted items not displaying correctly.
• Error when TMAC reports an alarm for the first time

Server 4.1.9

4/20/2022

• Fix help page title display.
• Address FANUC common variable range in documentation.
• Publish API documentation

Client 1.0.19

4/18/2022

• Update NC & TMAC alarms on production charts in real time.
• Automatically reload the TV view page when the event bus reconnects in case any changes were missed while it was disconnected

Client 1.0.18, Server 4.1.8

4/14/2022

• Better handling of long-running browser sessions: parts are limited to the chart date range displayed, and machine card charts automatically advance to the next day.
• Introduces "TV mode" - a slideshow of all machines.
• Backend changes that should slightly improve server performance

Client 1.0.17, Server 4.1.7

4/13/2022

• Allow selecting program groups when ordering in tool inventory table.
• Use day cutoff in local time zone for parts report.
• Fix issue where the tool history window keep previous replacements shown when opening it for a different tool.
• Include database schema in backups, wipe existing data before restoring.
• Update API HTTP server library and switch to new backend WebSocket library

Client 1.0.16, Server 4.1.6

4/11/2022

• Fixes an issue where the proxy version was not displayed correctly.
• Block machine updates when license is missing or expired

Client 1.0.15, Server 4.1.5

4/04/2022

• Tools table column options are now saved between visits.
• Tool usage breakdowns in the tool ordering table are now rounded to 2 decimal places and show a separate number for the usage per selected interval.
• Added buttons to select/deselect all machines when running a report that asks for a list of machines.
• Part counts in the parts report are now formatted with commas for easier readability.
• Fixes a bug where sensitive options would be accessible to non-admin users via separate HTTP requests.
• Removes some duplicated features that have been moved to the host process.
• Added an option to the Sort & Filter dropdown on the machines pages that sorts them by their current status in the following order:

1. Any status not listed here
2. Not yet reported
3. Has a TMAC alarm
4. Feed hold
5. Production stopped
6. Optional stop
7. Emergency stop
8. Activ

Client 1.0.14, Server 4.1.4

3/22/2022

• Fix TMAC alarm name lookups so they don't all show up as extreme alarms.
• Allow scheduling automatic backups.
• Fix the options window freezing when ontaktd is not available.
• Improve the display format of the backup device dropdown.
• Refresh data after event bus reconnects

Client 1.0.13, Server 4.1.3

3/15/2022

• Store TMAC job and learn status on each machine and display them in the expanded cards.
• Record the active TMAC job when replacing a tool and show it in the replacement history.
• Display machine overview data (parts counts and average cycle time) as a heatmap again.
• Display only the last 10 audit log and trash entries to avoid running out of memory on the client.
• Allow setting the system NTP server (on supported installations).
• Check for the presence of ontaktd before attempting communication (scanning for backup devices, setting the NTP server, applying license keys, etc.). This means things will load faster instead of timing out when it is not present

Client 1.0.12, Server 4.1.2

3/10/2022

• Show 10 tool replacements at a time for better performance.
• List server backup devices in options window

Client 1.0.11, Server 4.1.1

3/08/2022

• More reliable TMAC alarm reporting.
• Animation on machine card color chips when new alarms appear.
• Breaking change: OnTakt 4.1.0+ requires TMAC 3.1.0+ and OnTakt Proxy 2.1.0

Client 1.0.10

3/08/2022

• Ask password managers not to autofill the TMAC API key field in the machine editor

Client 1.0.9, Server 4.0.8

3/03/2021

• Separate field in the tool editor for tool stickout reference point.
• Option to show tool stickout/reference in the tools table.
• Label durable tools in the inventory table.
• Disable "show tools" buttons in the inventory point table for points without any tools

Client 1.0.8, Server 4.0.7

2/14/2022

• New license key system.
• Remove Google Analytics

Client 1.0.7, Server 4.0.6

2/01/2022

Low tool stock notifications

1. Enable notification destinations in the tool editor.
2. Set the reorder point for the tool.
3. A message will be sent to the selected channels when the total quantity of the tool in stock equals the reorder point

Client 1.0.6, Server 4.0.5

1/31/2022

• Scrapping multiple parts now offers a notes field that will be added to the notes of each part.
• Fixed an error when charting production of individual programs and program groups

Client 1.0.5

1/27/2022

• When replacing a tool, the number of that tool currently on order is now shown under the source selection list

Server 4.0.4

1/24/2022

• Add a "Tool Usage" report type that shows the expected and actual rates at which tool order items have been consumed by a chosen set of machines in a given time period

Client 1.0.4, Server 4.0.3

1/21/2022

Favorite machines

• Click the star on a machine to favorite it
• Hide non-favorited machines in the Filter & Sort menu
• Favorites are stored in each user account

Machine tags

• Administrators and planners can set tags on machines in the Edit Machine window.
• Customize machine tag colors in Options → Machines.
• Enter a list of tags in the Filter & Sort menu to show only machines that have at least one of those tags

Client 1.0.3, Server 4.0.2

1/20/2022

New features

• Chart date navigation buttons now fit their text format to the screen size better.
• Chart date navigation buttons now only show the precision available (weeks or years instead of always days).
• Machine/program/group overview charts are now line charts that show average cycle time instead of heatmaps:

Bugs fixed

• Notification bug preventing alarm message lookups
• Formatting error in Keyence MD-X error S096 preventing alarm message lookups
• Improved login performanc

Client 1.0.2, Server 4.0.1

1/13/2022

• The list of Okuma alarms with detail text available has been expanded.
• Individual alarms can be muted from notifying by adding them to a list in the machine's notification settings.
• The time it takes for the colors to fade on the machines page can be customized in the global shift options.
• Some bugs involving sorting tools while ordering have been fixed.

Client 1.0.1

1/03/2022

• The first part of each program on production charts now displays the name of the program next to it.
• Also, hovering over any part will now show its program name again.

Client 1.0.0, Server 4.0.0

12/30/2021

The next time a tool is expected to need replacing is now shown on the charts (if the "tool replacements"switch is on at the bottom), as shown below:

For now:

• Tools that are already past due for replacement are ignored.

Only the next replacement time of each tool is shown.