Siemens SINUMERIK: Difference between revisions

From Knowledge Base
No edit summary
No edit summary
Line 7: Line 7:
# Press the softkey page button at the bottom right of the screen. [[File:Softkey_switcher.webp|none|frame]]
# Press the softkey page button at the bottom right of the screen. [[File:Softkey_switcher.webp|none|frame]]
# Open the [[File:Licenses softkey.webp]] window.
# Open the [[File:Licenses softkey.webp]] window.
# [[File:License_all_options.webp|none|frame]]Switch to the "All options" tab at the top right.  
# Switch to the "All options" tab at the top right.
# Press the [[File:Button search.webp|alt=Search >]] button to the right of the screen.
# [[File:License_all_options.webp|none|frame]]Press the [[File:Button search.webp|alt=Search >]] button to the right of the screen.
# Enter "OPC" in the search field. [[File:Search opc.webp|frameless]]
# Enter "OPC" in the search field. [[File:Search_opc.webp|none|frame]]
# Press [[File:Button ok.webp|alt=OK]] at the bottom right of the screen.
# Press [[File:Button ok.webp|alt=OK]] at the bottom right of the screen.
#When "Access MyMachine / OPC UA" is highlighted, press the Cancel button at the bottom right of the screen.[[File:Search result.webp|none|frame]]
#When "Access MyMachine / OPC UA" is highlighted, press the Cancel button at the bottom right of the screen.[[File:Search result.webp|none|frame]]

Revision as of 15:28, 5 September 2023

Control configuration

Enabling the OPC-UA server

  1. Press the MENU SELECT key.
  2. Switch to the the Setup interface at the bottom of the screen.
    Setup softkey.webp
  3. Press the softkey page button at the bottom right of the screen.
    Softkey switcher.webp
  4. Open the Licenses softkey.webp window.
  5. Switch to the "All options" tab at the top right.
  6. License all options.webp
    Press the Search > button to the right of the screen.
  7. Enter "OPC" in the search field.
    Search opc.webp
  8. Press OK at the bottom right of the screen.
  9. When "Access MyMachine / OPC UA" is highlighted, press the Cancel button at the bottom right of the screen.
    Search result.webp
  10. Check the "Set" box for the option if it is not already checked and then press the Back button at the bottom right.
    OPC-UA enabled.webp
  11. If the option was not already enabled, restart the control.

Configuring the OPC-UA server

...

OnTakt configuration

...