Siemens SINUMERIK: Difference between revisions

Revision as of 15:27, 5 September 2023

Control configuration

Enabling the OPC-UA server

Press the key.
Switch to the the Setup interface at the bottom of the screen.
Press the softkey page button at the bottom right of the screen.
Open the window.
Switch to the "All options" tab at the top right.
Press the button to the right of the screen.
Enter "OPC" in the search field.
Press at the bottom right of the screen.
When "Access MyMachine / OPC UA" is highlighted, press the Cancel button at the bottom right of the screen.
Check the "Set" box for the option if it is not already checked and then press the Back button at the bottom right.
If the option was not already enabled, restart the control.

Configuring the OPC-UA server

...

OnTakt configuration

...

@@ Line 3: / Line 3: @@
 === Enabling the OPC-UA server ===
-# Press the MENU SELECT key.
+# Press the [[File:MENU SELECT.webp|alt=MENU SELECT]] key.
-# Switch to the the Setup interface at the bottom of the screen.
+# Switch to the the Setup interface at the bottom of the screen. [[File:Setup softkey.webp|frameless]]
-# Press the softkey page button at the bottom right of the screen.
+# Press the softkey page button at the bottom right of the screen. [[File:Softkey switcher.webp|frameless]]
-# Open the Licenses window.
+# Open the [[File:Licenses softkey.webp]] window.
-# Switch to the "All options" tab at the top right.
+# Switch to the "All options" tab at the top right. [[File:License all options.webp|frameless]]
-# Press the Search button to the right of the screen.
+# Press the [[File:Button search.webp|alt=Search >]] button to the right of the screen.
-# Enter "OPC" in the search field.
+# Enter "OPC" in the search field. [[File:Search opc.webp|frameless]]
-# Press OK at the bottom right of the screen.
+# Press [[File:Button ok.webp|alt=OK]] at the bottom right of the screen.
-# When "Access MyMachine / OPC UA" is highlighted, press the Cancel button at the bottom right of the screen.
+#When "Access MyMachine / OPC UA" is highlighted, press the Cancel button at the bottom right of the screen.[[File:Search result.webp|none|frame]]
-# Check the "Set" box for the option if it is not already checked and then press the Back button at the bottom right.
+# Check the "Set" box for the option if it is not already checked and then press the Back button at the bottom right.[[File:OPC-UA enabled.webp|none|frame]]
 # If the option was not already enabled, restart the control.