Version Table
Version
|
Release Date
|
Summary Notes
|
3.2
|
Nov-01-2022
|
- New Features:
- Modbus TCP I/O – Added new industrial protocol Modbus TCP I/O to allow Modbus TCP clients to integrate to TMAC I/O remotely.
- Peak Search Tool – Added new Data Viewer tool that allows searching for upper and lower peak values.
- Sensor Always Streaming – Added new setting to the system configuration screen to allow a sensor to be “always streaming”. This enables additional features that require an “always available” buffer of data.
- Chart Data Before & After Monitoring – Added new instance parameter settings to setup recording a data buffer before a start monitor and after a stop monitor or extreme alarm (requires a sensor to be always streaming).
- Peak Idle – Added peak idle detect to allow calculating idle based on the max value of a series of points before the start monitor (requires a sensor to be always streaming).
- Communications Status Widget – Added new menu containing the status of all configured devices to the main screens tool bar including a color indicator. Device status’s are now also visible from the diagnostics menu.
- Idle Follows Timeout – Added new Job menu setting that allows idle follows to be automatically turned off after specified amount of time within a job segment.
- Query Sensors – Allows searching for any Caron Engineering Inc. USB or Ethernet sensor while using the system configuration.
- Integrator Support Info – Added new Integrator Support message to the system configuration to allow integrators to override the default Caron Engineering Inc. support message.
- Set System Date – The system information screen now allows setting the current date and time.
- Simplified Views – Changed the view editor to use a more simplified pick list for selecting the channel layout.
- 6 Channel View – Added the ability to have 6 channels visible in a single view.
- Signature Global Edits – Added Signature job parameters to the global edit’s menu.
- 2-Phase Motors – Added support for monitoring 2 phase (DC) motors using the PT800.
- Haas CNC Support – Added Haas CNC control support.
Additional Notes:
- Added “Cut Time” to system events that occur while monitoring.
- Added additional machine details to the support package.
- Fixed an issue with the Explorer home screen where the machine list scroll bar would stop working.
- Fixed an issue with passive data not being able to purge if it was recorded during a “Signature” cut.
- Fixed an issue where undercut alarms were not being flagged on recording files while using the viewer filtering.
- Fixed an issue where feedrate override was not being rendered correctly on specific cuts in the Data Viewer.
- Fixed an issue where Signature reference cuts were not able to be purged.
- Fixed an issue where release notes where not being shown in chronological order.
- Fixed an issue with incorrect validation of the approach off job menu setting.
- Fixed an issue where logging would not stop when the hard drive disk was flagged as full.
- Fixed an issue where a crash would occur when multiple instances were using email notifications.
|
3.1.3
|
Sep-09-2022
|
IMTS Release
|
3.0
|
Jan-01-2021
|
Epic architecture update; database storage, web application interface, live editing, historical cut overlays.
|
|
|
|